1318888080 Blower Motor for FIAT Ducato
Primary OE reference: 1318888080
Cross-reference 1: 1307829080
Cross-reference 2: 6441.E4
Cross-reference 3: 87402
Cross-reference 4: 101925102
Cross-reference 5: 8EW009159531
Cross-reference 6: DEA09020
Cross-reference 7: K410003R
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FIAT Ducato
Brand: FIAT
Model: Ducato
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1318888080 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 1318888080 for application-led sourcing.
For catalogue item 6219-001, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6219-001 when comparing this 1318888080 airflow configuration.
OE Reference and Application
The primary catalogue number is 1318888080. The recorded application is FIAT Ducato. For 6219-001, Measure the 1318888080 wheel height and outer diameter, then compare the electrical socket and base contour with the 1318888080 product photos. Record 6219-001 with the approved OE reference.
HVAC Interface and 1318888080 installation
During work on 6219-001, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 1318888080 installation. Recheck 6219-001 before the lower trim is closed.
For item 6219-001, confirm that the 1318888080 centrifugal wheel clears its housing and that the 6219-001 connector lock engages without force. After seating 6219-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1318888080 |
| Cross-reference numbers | 1307829080 / 6441.E4 / 87402 / 101925102 / 8EW009159531 / DEA09020 / K410003R |
| Vehicle brand | FIAT |
| Vehicle model | Ducato |
| Model year | Confirm by OE reference |
| 1318888080 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6219-001, Packing preparation accounts for the 1318888080 motor weight and wheel shape to reduce movement inside the carton. The 6219-001 record remains the picking reference.
For trade item 6219-001, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6219-001 on the packing instruction.
Frequently Asked Questions
How should item 6219-001 and blower number 1318888080 be verified?
Match 6219-001 to the complete 1318888080 marking, then compare the 6219-001 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.
Can 6219-001 have more than one vehicle-side blower configuration?
Yes. FIAT production changes can affect 6219-001; confirm steering position, climate-control specification and the original 6219-001 geometry before approval.
What circuit checks are useful when 6219-001 does not operate?
For 6219-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-001 motor again.
Which details should accompany a wholesale request for 6219-001?
Provide item 6219-001, OE 1318888080, the stated application, quantity and destination; add 6219-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6219-001?
Clear debris from the air inlet, check that the 6219-001 wheel turns freely, seat the 6219-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6219-001: Send 1318888080, the 6219-001 application and required quantity for a fitment and supply review.
