7M1819021D Blower Motor for FORD Galaxy
Primary OE reference: 7M1819021D
Cross-reference 1: 1038587
Cross-reference 2: 715239
Cross-reference 3: 7M1819015
Cross-reference 4: 7M1819015B
Cross-reference 5: 7M1819021B
Cross-reference 6: 95NW18456AC
Cross-reference 7: 95NW18456AD
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Galaxy
Brand: FORD
Model: Galaxy
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7M1819021D Automotive Blower Motor Overview
Reference 7M1819021D identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6203-013, the 7M1819021D blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-013 when comparing this 7M1819021D airflow configuration.
OE Reference and Application
The primary catalogue number is 7M1819021D. The recorded application is FORD Galaxy. For 6203-013, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-013 with the approved OE reference.
HVAC Interface and 7M1819021D installation
During work on 6203-013, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-013 before the lower trim is closed.
For item 6203-013, confirm that the 7M1819021D centrifugal wheel clears its housing and that the 6203-013 connector lock engages without force. After seating 6203-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-013.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7M1819021D |
| Cross-reference numbers | 1038587 / 715239 / 7M1819015 / 7M1819015B / 7M1819021B / 95NW18456AC / 95NW18456AD |
| Vehicle brand | FORD |
| Vehicle model | Galaxy |
| Model year | Confirm by OE reference |
| 7M1819021D installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-013, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-013 record remains the picking reference.
For trade item 6203-013, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-013 on the packing instruction.
Frequently Asked Questions
How should item 6203-013 and blower number 7M1819021D be verified?
Match 6203-013 to the complete 7M1819021D marking, then compare the 6203-013 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-013 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-013; confirm steering position, climate-control specification and the original 6203-013 geometry before approval.
What circuit checks are useful when 6203-013 does not operate?
For 6203-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-013 motor again.
Which details should accompany a wholesale request for 6203-013?
Provide item 6203-013, OE 7M1819021D, the stated application, quantity and destination; add 6203-013 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-013?
Clear debris from the air inlet, check that the 6203-013 wheel turns freely, seat the 6203-013 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-013: Send 7M1819021D, the 6203-013 application and required quantity for a fitment and supply review.
