15781505 Blower Motor for CHEVROLET Equinox
Primary OE reference: 15781505
Cross-reference 1: 22896430
Cross-reference 2: 25952810
Cross-reference 3: 700211
Cross-reference 4: BM9324C
Cross-reference 5: 15-80663
Product type: Automotive HVAC Blower Motor
Applicable vehicle: CHEVROLET Equinox
Brand: CHEVROLET
Model: Equinox
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
15781505 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 15781505 together with the 15781505 product images and vehicle data on this page.
For catalogue item 6209-041, the 15781505 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6209-041 when comparing this 15781505 airflow configuration.
OE Reference and Application
The primary catalogue number is 15781505. The recorded application is CHEVROLET Equinox. For 6209-041, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6209-041 with the approved OE reference.
HVAC Interface and 15781505 installation
During work on 6209-041, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6209-041 before the lower trim is closed.
For item 6209-041, confirm that the 15781505 centrifugal wheel clears its housing and that the 6209-041 connector lock engages without force. After seating 6209-041, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-041.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 15781505 |
| Cross-reference numbers | 22896430 / 25952810 / 700211 / BM9324C / 15-80663 |
| Vehicle brand | CHEVROLET |
| Vehicle model | Equinox |
| Model year | Confirm by OE reference |
| 15781505 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6209-041, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6209-041 record remains the picking reference.
For trade item 6209-041, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6209-041 on the packing instruction.
Frequently Asked Questions
How should item 6209-041 and blower number 15781505 be verified?
Match 6209-041 to the complete 15781505 marking, then compare the 6209-041 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.
Can 6209-041 have more than one vehicle-side blower configuration?
Yes. CHEVROLET production changes can affect 6209-041; confirm steering position, climate-control specification and the original 6209-041 geometry before approval.
What circuit checks are useful when 6209-041 does not operate?
For 6209-041, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-041 motor again.
Which details should accompany a wholesale request for 6209-041?
Provide item 6209-041, OE 15781505, the stated application, quantity and destination; add 6209-041 carton or private-label requirements separately.
How can noise be avoided after fitting 6209-041?
Clear debris from the air inlet, check that the 6209-041 wheel turns freely, seat the 6209-041 flange evenly and keep wiring away from the impeller.
Request a quote for 6209-041: Send 15781505, the 6209-041 application and required quantity for a fitment and supply review.
