10341223 Blower Motor for BUICK Terraza
Primary OE reference: 10341223
Cross-reference 1: 15103818
Cross-reference 2: 15809345
Cross-reference 3: 10341214
Cross-reference 4: 10424943
Cross-reference 5: 10430162
Cross-reference 6: 11135085
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Terraza
Brand: BUICK
Model: Terraza
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
10341223 Automotive Blower Motor Overview
This product entry documents the 10341223 blower unit with practical identification and 10341223 installation checkpoints.
For catalogue item 6208-069, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 10341223 blower important at idle and in traffic. Use 6208-069 when comparing this 10341223 airflow configuration.
OE Reference and Application
The primary catalogue number is 10341223. The recorded application is BUICK Terraza. For 6208-069, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6208-069 with the approved OE reference.
HVAC Interface and 10341223 installation
During work on 6208-069, After 10341223 installation, operate low through high speed and confirm 10341223 airflow reaches the selected vents without abnormal vibration. Recheck 6208-069 before the lower trim is closed.
For item 6208-069, confirm that the 10341223 centrifugal wheel clears its housing and that the 6208-069 connector lock engages without force. After seating 6208-069, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-069.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 10341223 |
| Cross-reference numbers | 15103818 / 15809345 / 10341214 / 10424943 / 10430162 / 11135085 |
| Vehicle brand | BUICK |
| Vehicle model | Terraza |
| Model year | Confirm by OE reference |
| 10341223 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-069, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-069 record remains the picking reference.
For trade item 6208-069, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-069 on the packing instruction.
Frequently Asked Questions
How should item 6208-069 and blower number 10341223 be verified?
Match 6208-069 to the complete 10341223 marking, then compare the 6208-069 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-069 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-069; confirm steering position, climate-control specification and the original 6208-069 geometry before approval.
What circuit checks are useful when 6208-069 does not operate?
For 6208-069, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-069 motor again.
Which details should accompany a wholesale request for 6208-069?
Provide item 6208-069, OE 10341223, the stated application, quantity and destination; add 6208-069 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-069?
Clear debris from the air inlet, check that the 6208-069 wheel turns freely, seat the 6208-069 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-069: Send 10341223, the 6208-069 application and required quantity for a fitment and supply review.
