7802A217 Blower Motor for MITSUBISHI Lancer 2008-2017
Primary OE reference: 7802A217
Cross-reference 1: 7802A017
Cross-reference 2: CSA431D214A
Cross-reference 3: TYC700239
Cross-reference 4: PM9362
Cross-reference 5: PM4434
Cross-reference 6: 75848
Cross-reference 7: 7842A076
Cross-reference 8: CSA431D214B
Cross-reference 9: 7802A277
Cross-reference 10: 615-50180
Cross-reference 11: 7802A239
Cross-reference 12: 7802A21
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI Lancer 2008-2017
Brand: MITSUBISHI
Model: Lancer
Vehicle year: 2008-2017
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7802A217 Automotive Blower Motor Overview
The 7802A217 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6215-001, When the climate-control circuit commands 7802A217 airflow, the electric motor rotates the 7802A217 fan wheel inside the HVAC housing. Use 6215-001 when comparing this 7802A217 airflow configuration.
OE Reference and Application
The primary catalogue number is 7802A217. The recorded application is MITSUBISHI Lancer 2008-2017. For 6215-001, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6215-001 with the approved OE reference.
HVAC Interface and 7802A217 installation
During work on 6215-001, If 7802A217 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 7802A217 motor is the only cause. Recheck 6215-001 before the lower trim is closed.
For item 6215-001, confirm that the 7802A217 centrifugal wheel clears its housing and that the 6215-001 connector lock engages without force. After seating 6215-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7802A217 |
| Cross-reference numbers | 7802A017 / CSA431D214A / TYC700239 / PM9362 / PM4434 / 75848 / 7842A076 / CSA431D214B / 7802A277 / 615-50180 / 7802A239 / 7802A21 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Lancer |
| Model year | 2008-2017 |
| 7802A217 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-001, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6215-001 record remains the picking reference.
For trade item 6215-001, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6215-001 on the packing instruction.
Frequently Asked Questions
How should item 6215-001 and blower number 7802A217 be verified?
Match 6215-001 to the complete 7802A217 marking, then compare the 6215-001 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-001 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-001; confirm steering position, climate-control specification and the original 6215-001 geometry before approval.
What circuit checks are useful when 6215-001 does not operate?
For 6215-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-001 motor again.
Which details should accompany a wholesale request for 6215-001?
Provide item 6215-001, OE 7802A217, the stated application, quantity and destination; add 6215-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-001?
Clear debris from the air inlet, check that the 6215-001 wheel turns freely, seat the 6215-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-001: Send 7802A217, the 6215-001 application and required quantity for a fitment and supply review.
