JGC500080 Blower Motor for LAND ROVER LR3 2004-2009
Primary OE reference: JGC500080
Cross-reference 1: JGC500020
Cross-reference 2: MF0160700850
Cross-reference 3: MF0160700701
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LAND ROVER LR3 2004-2009
Brand: LAND ROVER
Model: LR3
Vehicle year: 2004-2009
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
JGC500080 Automotive Blower Motor Overview
The JGC500080 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6238-002, When the climate-control circuit commands JGC500080 airflow, the electric motor rotates the JGC500080 fan wheel inside the HVAC housing. Use 6238-002 when comparing this JGC500080 airflow configuration.
OE Reference and Application
The primary catalogue number is JGC500080. The recorded application is LAND ROVER LR3 2004-2009. For 6238-002, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6238-002 with the approved OE reference.
HVAC Interface and JGC500080 installation
During work on 6238-002, If JGC500080 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the JGC500080 motor is the only cause. Recheck 6238-002 before the lower trim is closed.
For item 6238-002, confirm that the JGC500080 centrifugal wheel clears its housing and that the 6238-002 connector lock engages without force. After seating 6238-002, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-002.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | JGC500080 |
| Cross-reference numbers | JGC500020 / MF0160700850 / MF0160700701 |
| Vehicle brand | LAND ROVER |
| Vehicle model | LR3 |
| Model year | 2004-2009 |
| JGC500080 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6238-002, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6238-002 record remains the picking reference.
For trade item 6238-002, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6238-002 on the packing instruction.
Frequently Asked Questions
How should item 6238-002 and blower number JGC500080 be verified?
Match 6238-002 to the complete JGC500080 marking, then compare the 6238-002 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.
Can 6238-002 have more than one vehicle-side blower configuration?
Yes. LAND ROVER production changes can affect 6238-002; confirm steering position, climate-control specification and the original 6238-002 geometry before approval.
What circuit checks are useful when 6238-002 does not operate?
For 6238-002, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-002 motor again.
Which details should accompany a wholesale request for 6238-002?
Provide item 6238-002, OE JGC500080, the stated application, quantity and destination; add 6238-002 carton or private-label requirements separately.
How can noise be avoided after fitting 6238-002?
Clear debris from the air inlet, check that the 6238-002 wheel turns freely, seat the 6238-002 flange evenly and keep wiring away from the impeller.
Request a quote for 6238-002: Send JGC500080, the 6238-002 application and required quantity for a fitment and supply review.
