1051864-00-A Blower Motor for TESLA Model S
Primary OE reference: 1051864-00-A
Cross-reference 1: 6007600-00-A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TESLA Model S
Brand: TESLA
Model: Model S
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1051864-00-A Automotive Blower Motor Overview
This listing links 1051864-00-A with the supplied blower-motor geometry, connector and application information.
For catalogue item 6244-002, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6244-002 when comparing this 1051864-00-A airflow configuration.
OE Reference and Application
The primary catalogue number is 1051864-00-A. The recorded application is TESLA Model S. For 6244-002, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6244-002 with the approved OE reference.
HVAC Interface and 1051864-00-A installation
During work on 6244-002, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 1051864-00-A installation. Recheck 6244-002 before the lower trim is closed.
For item 6244-002, confirm that the 1051864-00-A centrifugal wheel clears its housing and that the 6244-002 connector lock engages without force. After seating 6244-002, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6244-002.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1051864-00-A |
| Cross-reference numbers | 6007600-00-A |
| Vehicle brand | TESLA |
| Vehicle model | Model S |
| Model year | Confirm by OE reference |
| 1051864-00-A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6244-002, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6244-002 record remains the picking reference.
For trade item 6244-002, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6244-002 on the packing instruction.
Frequently Asked Questions
How should item 6244-002 and blower number 1051864-00-A be verified?
Match 6244-002 to the complete 1051864-00-A marking, then compare the 6244-002 plug, terminal count, mounting flange and wheel dimensions with the removed TESLA unit.
Can 6244-002 have more than one vehicle-side blower configuration?
Yes. TESLA production changes can affect 6244-002; confirm steering position, climate-control specification and the original 6244-002 geometry before approval.
What circuit checks are useful when 6244-002 does not operate?
For 6244-002, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6244-002 motor again.
Which details should accompany a wholesale request for 6244-002?
Provide item 6244-002, OE 1051864-00-A, the stated application, quantity and destination; add 6244-002 carton or private-label requirements separately.
How can noise be avoided after fitting 6244-002?
Clear debris from the air inlet, check that the 6244-002 wheel turns freely, seat the 6244-002 flange evenly and keep wiring away from the impeller.
Request a quote for 6244-002: Send 1051864-00-A, the 6244-002 application and required quantity for a fitment and supply review.
