6R1819015 Blower Motor for AUDI A1 2011-2017
Primary OE reference: 6R1819015
Product type: Automotive HVAC Blower Motor
Applicable vehicle: AUDI A1 2011-2017
Brand: AUDI
Model: A1
Vehicle year: 2011-2017
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6R1819015 Automotive Blower Motor Overview
This listing links 6R1819015 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6233-006, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6233-006 when comparing this 6R1819015 airflow configuration.
OE Reference and Application
The primary catalogue number is 6R1819015. The recorded application is AUDI A1 2011-2017. For 6233-006, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6233-006 with the approved OE reference.
HVAC Interface and 6R1819015 installation
During work on 6233-006, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 6R1819015 installation. Recheck 6233-006 before the lower trim is closed.
For item 6233-006, confirm that the 6R1819015 centrifugal wheel clears its housing and that the 6233-006 connector lock engages without force. After seating 6233-006, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-006.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6R1819015 |
| Cross-reference numbers | 6R1819015 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2011-2017 |
| 6R1819015 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6233-006, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6233-006 record remains the picking reference.
For trade item 6233-006, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6233-006 on the packing instruction.
Frequently Asked Questions
How should item 6233-006 and blower number 6R1819015 be verified?
Match 6233-006 to the complete 6R1819015 marking, then compare the 6233-006 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.
Can 6233-006 have more than one vehicle-side blower configuration?
Yes. AUDI production changes can affect 6233-006; confirm steering position, climate-control specification and the original 6233-006 geometry before approval.
What circuit checks are useful when 6233-006 does not operate?
For 6233-006, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-006 motor again.
Which details should accompany a wholesale request for 6233-006?
Provide item 6233-006, OE 6R1819015, the stated application, quantity and destination; add 6233-006 carton or private-label requirements separately.
How can noise be avoided after fitting 6233-006?
Clear debris from the air inlet, check that the 6233-006 wheel turns freely, seat the 6233-006 flange evenly and keep wiring away from the impeller.
Request a quote for 6233-006: Send 6R1819015, the 6233-006 application and required quantity for a fitment and supply review.
