8100100U0030-F211 Blower Motor for JAC Refine S7
Primary OE reference: 8100100U0030-F211
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JAC Refine S7
Brand: JAC
Model: Refine S7
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
8100100U0030-F211 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 8100100U0030-F211 to support OE-number comparison before purchase.
For catalogue item 6213-007, Cabin 8100100U0030-F211 airflow depends on the 8100100U0030-F211 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6213-007 when comparing this 8100100U0030-F211 airflow configuration.
OE Reference and Application
The primary catalogue number is 8100100U0030-F211. The recorded application is JAC Refine S7. For 6213-007, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6213-007 with the approved OE reference.
HVAC Interface and 8100100U0030-F211 installation
During work on 6213-007, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6213-007 before the lower trim is closed.
For item 6213-007, confirm that the 8100100U0030-F211 centrifugal wheel clears its housing and that the 6213-007 connector lock engages without force. After seating 6213-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 8100100U0030-F211 |
| Cross-reference numbers | 8100100U0030-F211 |
| Vehicle brand | JAC |
| Vehicle model | Refine S7 |
| Model year | Confirm by OE reference |
| 8100100U0030-F211 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6213-007, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6213-007 record remains the picking reference.
For trade item 6213-007, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6213-007 on the packing instruction.
Frequently Asked Questions
How should item 6213-007 and blower number 8100100U0030-F211 be verified?
Match 6213-007 to the complete 8100100U0030-F211 marking, then compare the 6213-007 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.
Can 6213-007 have more than one vehicle-side blower configuration?
Yes. JAC production changes can affect 6213-007; confirm steering position, climate-control specification and the original 6213-007 geometry before approval.
What circuit checks are useful when 6213-007 does not operate?
For 6213-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-007 motor again.
Which details should accompany a wholesale request for 6213-007?
Provide item 6213-007, OE 8100100U0030-F211, the stated application, quantity and destination; add 6213-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6213-007?
Clear debris from the air inlet, check that the 6213-007 wheel turns freely, seat the 6213-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6213-007: Send 8100100U0030-F211, the 6213-007 application and required quantity for a fitment and supply review.
