87130-52140 Blower Motor for TOYOTA Yaris 2014
Primary OE reference: 87130-52140
Cross-reference 1: 87130-52180
Cross-reference 2: TYC700264
Cross-reference 3: 8710351802
Cross-reference 4: 76970
Cross-reference 5: 9380C
Cross-reference 6: 8710352180
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Yaris 2014
Brand: TOYOTA
Model: Yaris
Vehicle year: 2014
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87130-52140 Automotive Blower Motor Overview
This product entry documents the 87130-52140 blower unit with practical identification and 87130-52140 installation checkpoints.
For catalogue item 6210-085, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 87130-52140 blower important at idle and in traffic. Use 6210-085 when comparing this 87130-52140 airflow configuration.
OE Reference and Application
The primary catalogue number is 87130-52140. The recorded application is TOYOTA Yaris 2014. For 6210-085, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6210-085 with the approved OE reference.
HVAC Interface and 87130-52140 installation
During work on 6210-085, After 87130-52140 installation, operate low through high speed and confirm 87130-52140 airflow reaches the selected vents without abnormal vibration. Recheck 6210-085 before the lower trim is closed.
For item 6210-085, confirm that the 87130-52140 centrifugal wheel clears its housing and that the 6210-085 connector lock engages without force. After seating 6210-085, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-085.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87130-52140 |
| Cross-reference numbers | 87130-52180 / TYC700264 / 8710351802 / 76970 / 9380C / 8710352180 |
| Vehicle brand | TOYOTA |
| Vehicle model | Yaris |
| Model year | 2014 |
| 87130-52140 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-085, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-085 record remains the picking reference.
For trade item 6210-085, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-085 on the packing instruction.
Frequently Asked Questions
How should item 6210-085 and blower number 87130-52140 be verified?
Match 6210-085 to the complete 87130-52140 marking, then compare the 6210-085 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-085 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-085; confirm steering position, climate-control specification and the original 6210-085 geometry before approval.
What circuit checks are useful when 6210-085 does not operate?
For 6210-085, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-085 motor again.
Which details should accompany a wholesale request for 6210-085?
Provide item 6210-085, OE 87130-52140, the stated application, quantity and destination; add 6210-085 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-085?
Clear debris from the air inlet, check that the 6210-085 wheel turns freely, seat the 6210-085 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-085: Send 87130-52140, the 6210-085 application and required quantity for a fitment and supply review.
