RC.530.182 Blower Motor for TOYOTA Verso
Primary OE reference: RC.530.182
Cross-reference 1: 871030D290
Cross-reference 2: 272700-1441
Cross-reference 3: 871030D360
Cross-reference 4: 871030D270
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Verso
Brand: TOYOTA
Model: Verso
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
RC.530.182 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference RC.530.182 for application-led sourcing.
For catalogue item 6210-084, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6210-084 when comparing this RC.530.182 airflow configuration.
OE Reference and Application
The primary catalogue number is RC.530.182. The recorded application is TOYOTA Verso. For 6210-084, Measure the RC.530.182 wheel height and outer diameter, then compare the electrical socket and base contour with the RC.530.182 product photos. Record 6210-084 with the approved OE reference.
HVAC Interface and RC.530.182 installation
During work on 6210-084, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after RC.530.182 installation. Recheck 6210-084 before the lower trim is closed.
For item 6210-084, confirm that the RC.530.182 centrifugal wheel clears its housing and that the 6210-084 connector lock engages without force. After seating 6210-084, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-084.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | RC.530.182 |
| Cross-reference numbers | 871030D290 / 272700-1441 / 871030D360 / 871030D270 |
| Vehicle brand | TOYOTA |
| Vehicle model | Verso |
| Model year | Confirm by OE reference |
| RC.530.182 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-084, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6210-084 record remains the picking reference.
For trade item 6210-084, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6210-084 on the packing instruction.
Frequently Asked Questions
How should item 6210-084 and blower number RC.530.182 be verified?
Match 6210-084 to the complete RC.530.182 marking, then compare the 6210-084 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-084 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-084; confirm steering position, climate-control specification and the original 6210-084 geometry before approval.
What circuit checks are useful when 6210-084 does not operate?
For 6210-084, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-084 motor again.
Which details should accompany a wholesale request for 6210-084?
Provide item 6210-084, OE RC.530.182, the stated application, quantity and destination; add 6210-084 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-084?
Clear debris from the air inlet, check that the 6210-084 wheel turns freely, seat the 6210-084 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-084: Send RC.530.182, the 6210-084 application and required quantity for a fitment and supply review.
