87103-0K380 Blower Motor for TOYOTA Hilux
Primary OE reference: 87103-0K380
Cross-reference 1: 87103-0K381
Cross-reference 2: 272700-9001
Cross-reference 3: 272700-6760
Cross-reference 4: 272700-4420
Cross-reference 5: 871030K320
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Hilux
Brand: TOYOTA
Model: Hilux
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-0K380 Automotive Blower Motor Overview
Reference 87103-0K380 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6210-081, the 87103-0K380 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-081 when comparing this 87103-0K380 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-0K380. The recorded application is TOYOTA Hilux. For 6210-081, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6210-081 with the approved OE reference.
HVAC Interface and 87103-0K380 installation
During work on 6210-081, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-081 before the lower trim is closed.
For item 6210-081, confirm that the 87103-0K380 centrifugal wheel clears its housing and that the 6210-081 connector lock engages without force. After seating 6210-081, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-081.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-0K380 |
| Cross-reference numbers | 87103-0K381 / 272700-9001 / 272700-6760 / 272700-4420 / 871030K320 |
| Vehicle brand | TOYOTA |
| Vehicle model | Hilux |
| Model year | Confirm by OE reference |
| 87103-0K380 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-081, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-081 record remains the picking reference.
For trade item 6210-081, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6210-081 on the packing instruction.
Frequently Asked Questions
How should item 6210-081 and blower number 87103-0K380 be verified?
Match 6210-081 to the complete 87103-0K380 marking, then compare the 6210-081 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-081 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-081; confirm steering position, climate-control specification and the original 6210-081 geometry before approval.
What circuit checks are useful when 6210-081 does not operate?
For 6210-081, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-081 motor again.
Which details should accompany a wholesale request for 6210-081?
Provide item 6210-081, OE 87103-0K380, the stated application, quantity and destination; add 6210-081 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-081?
Clear debris from the air inlet, check that the 6210-081 wheel turns freely, seat the 6210-081 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-081: Send 87103-0K380, the 6210-081 application and required quantity for a fitment and supply review.
