87103-50100 Blower Motor for LEXUS LS 460 2007-2012
Primary OE reference: 87103-50100
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LEXUS LS 460 2007-2012
Brand: LEXUS
Model: LS 460
Vehicle year: 2007-2012
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
87103-50100 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 87103-50100 together with the 87103-50100 product images and vehicle data on this page.
For catalogue item 6210-041, the 87103-50100 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-041 when comparing this 87103-50100 airflow configuration.
OE Reference and Application
The primary catalogue number is 87103-50100. The recorded application is LEXUS LS 460 2007-2012. For 6210-041, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6210-041 with the approved OE reference.
HVAC Interface and 87103-50100 installation
During work on 6210-041, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-041 before the lower trim is closed.
For item 6210-041, confirm that the 87103-50100 centrifugal wheel clears its housing and that the 6210-041 connector lock engages without force. After seating 6210-041, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-041.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 87103-50100 |
| Cross-reference numbers | 87103-50100 |
| Vehicle brand | LEXUS |
| Vehicle model | LS 460 |
| Model year | 2007-2012 |
| 87103-50100 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-041, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6210-041 record remains the picking reference.
For trade item 6210-041, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6210-041 on the packing instruction.
Frequently Asked Questions
How should item 6210-041 and blower number 87103-50100 be verified?
Match 6210-041 to the complete 87103-50100 marking, then compare the 6210-041 plug, terminal count, mounting flange and wheel dimensions with the removed LEXUS unit.
Can 6210-041 have more than one vehicle-side blower configuration?
Yes. LEXUS production changes can affect 6210-041; confirm steering position, climate-control specification and the original 6210-041 geometry before approval.
What circuit checks are useful when 6210-041 does not operate?
For 6210-041, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-041 motor again.
Which details should accompany a wholesale request for 6210-041?
Provide item 6210-041, OE 87103-50100, the stated application, quantity and destination; add 6210-041 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-041?
Clear debris from the air inlet, check that the 6210-041 wheel turns freely, seat the 6210-041 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-041: Send 87103-50100, the 6210-041 application and required quantity for a fitment and supply review.
