116360-19304D Blower Motor for TOYOTA Yaris 2015-2017
Primary OE reference: 116360-19304D
Cross-reference 1: 272700-1431
Product type: Automotive HVAC Blower Motor
Applicable vehicle: TOYOTA Yaris 2015-2017
Brand: TOYOTA
Model: Yaris
Vehicle year: 2015-2017
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
116360-19304D Automotive Blower Motor Overview
Reference 116360-19304D identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6210-018, the 116360-19304D blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-018 when comparing this 116360-19304D airflow configuration.
OE Reference and Application
The primary catalogue number is 116360-19304D. The recorded application is TOYOTA Yaris 2015-2017. For 6210-018, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6210-018 with the approved OE reference.
HVAC Interface and 116360-19304D installation
During work on 6210-018, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-018 before the lower trim is closed.
For item 6210-018, confirm that the 116360-19304D centrifugal wheel clears its housing and that the 6210-018 connector lock engages without force. After seating 6210-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 116360-19304D |
| Cross-reference numbers | 272700-1431 |
| Vehicle brand | TOYOTA |
| Vehicle model | Yaris |
| Model year | 2015-2017 |
| 116360-19304D installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-018, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6210-018 record remains the picking reference.
For trade item 6210-018, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6210-018 on the packing instruction.
Frequently Asked Questions
How should item 6210-018 and blower number 116360-19304D be verified?
Match 6210-018 to the complete 116360-19304D marking, then compare the 6210-018 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.
Can 6210-018 have more than one vehicle-side blower configuration?
Yes. TOYOTA production changes can affect 6210-018; confirm steering position, climate-control specification and the original 6210-018 geometry before approval.
What circuit checks are useful when 6210-018 does not operate?
For 6210-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-018 motor again.
Which details should accompany a wholesale request for 6210-018?
Provide item 6210-018, OE 116360-19304D, the stated application, quantity and destination; add 6210-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-018?
Clear debris from the air inlet, check that the 6210-018 wheel turns freely, seat the 6210-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-018: Send 116360-19304D, the 6210-018 application and required quantity for a fitment and supply review.
