52442551 Blower Motor for BUICK Regal
Primary OE reference: 52442551
Cross-reference 1: 52442552
Cross-reference 2: 52485612
Cross-reference 3: 93736157
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Regal
Brand: BUICK
Model: Regal
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52442551 Automotive Blower Motor Overview
This product entry documents the 52442551 blower unit with practical identification and 52442551 installation checkpoints.
For catalogue item 6208-007, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 52442551 blower important at idle and in traffic. Use 6208-007 when comparing this 52442551 airflow configuration.
OE Reference and Application
The primary catalogue number is 52442551. The recorded application is BUICK Regal. For 6208-007, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6208-007 with the approved OE reference.
HVAC Interface and 52442551 installation
During work on 6208-007, After 52442551 installation, operate low through high speed and confirm 52442551 airflow reaches the selected vents without abnormal vibration. Recheck 6208-007 before the lower trim is closed.
For item 6208-007, confirm that the 52442551 centrifugal wheel clears its housing and that the 6208-007 connector lock engages without force. After seating 6208-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52442551 |
| Cross-reference numbers | 52442552 / 52485612 / 93736157 |
| Vehicle brand | BUICK |
| Vehicle model | Regal |
| Model year | Confirm by OE reference |
| 52442551 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-007, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-007 record remains the picking reference.
For trade item 6208-007, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-007 on the packing instruction.
Frequently Asked Questions
How should item 6208-007 and blower number 52442551 be verified?
Match 6208-007 to the complete 52442551 marking, then compare the 6208-007 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-007 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-007; confirm steering position, climate-control specification and the original 6208-007 geometry before approval.
What circuit checks are useful when 6208-007 does not operate?
For 6208-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-007 motor again.
Which details should accompany a wholesale request for 6208-007?
Provide item 6208-007, OE 52442551, the stated application, quantity and destination; add 6208-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-007?
Clear debris from the air inlet, check that the 6208-007 wheel turns freely, seat the 6208-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-007: Send 52442551, the 6208-007 application and required quantity for a fitment and supply review.
