79310-TM0-T01 Blower Motor for HONDA City 2009-2014
Primary OE reference: 79310-TM0-T01
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA City 2009-2014
Brand: HONDA
Model: City
Vehicle year: 2009-2014
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-TM0-T01 Automotive Blower Motor Overview
YoonShan catalogues 79310-TM0-T01 as an HVAC 79310-TM0-T01 airflow component for workshops, distributors and export buyers.
For catalogue item 6207-015, When the climate-control circuit commands 79310-TM0-T01 airflow, the electric motor rotates the 79310-TM0-T01 fan wheel inside the HVAC housing. Use 6207-015 when comparing this 79310-TM0-T01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-TM0-T01. The recorded application is HONDA City 2009-2014. For 6207-015, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed HONDA unit. Record 6207-015 with the approved OE reference.
HVAC Interface and 79310-TM0-T01 installation
During work on 6207-015, If 79310-TM0-T01 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 79310-TM0-T01 motor is the only cause. Recheck 6207-015 before the lower trim is closed.
For item 6207-015, confirm that the 79310-TM0-T01 centrifugal wheel clears its housing and that the 6207-015 connector lock engages without force. After seating 6207-015, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-015.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-TM0-T01 |
| Cross-reference numbers | 79310-TM0-T01 |
| Vehicle brand | HONDA |
| Vehicle model | City |
| Model year | 2009-2014 |
| 79310-TM0-T01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-015, Packing preparation accounts for the 79310-TM0-T01 motor weight and wheel shape to reduce movement inside the carton. The 6207-015 record remains the picking reference.
For trade item 6207-015, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-015 on the packing instruction.
Frequently Asked Questions
How should item 6207-015 and blower number 79310-TM0-T01 be verified?
Match 6207-015 to the complete 79310-TM0-T01 marking, then compare the 6207-015 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-015 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-015; confirm steering position, climate-control specification and the original 6207-015 geometry before approval.
What circuit checks are useful when 6207-015 does not operate?
For 6207-015, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-015 motor again.
Which details should accompany a wholesale request for 6207-015?
Provide item 6207-015, OE 79310-TM0-T01, the stated application, quantity and destination; add 6207-015 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-015?
Clear debris from the air inlet, check that the 6207-015 wheel turns freely, seat the 6207-015 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-015: Send 79310-TM0-T01, the 6207-015 application and required quantity for a fitment and supply review.
