GHR161B10 Blower Motor for MAZDA 6 2014-2017
Primary OE reference: GHR161B10
Cross-reference 1: BM10039C
Cross-reference 2: 8727005760
Cross-reference 3: HB111DN2002
Cross-reference 4: GME661B10
Cross-reference 5: 700332
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 6 2014-2017
Brand: MAZDA
Model: 6
Vehicle year: 2014-2017
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
GHR161B10 Automotive Blower Motor Overview
This listing links GHR161B10 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-010, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-010 when comparing this GHR161B10 airflow configuration.
OE Reference and Application
The primary catalogue number is GHR161B10. The recorded application is MAZDA 6 2014-2017. For 6206-010, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-010 with the approved OE reference.
HVAC Interface and GHR161B10 installation
During work on 6206-010, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after GHR161B10 installation. Recheck 6206-010 before the lower trim is closed.
For item 6206-010, confirm that the GHR161B10 centrifugal wheel clears its housing and that the 6206-010 connector lock engages without force. After seating 6206-010, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-010.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | GHR161B10 |
| Cross-reference numbers | BM10039C / 8727005760 / HB111DN2002 / GME661B10 / 700332 |
| Vehicle brand | MAZDA |
| Vehicle model | 6 |
| Model year | 2014-2017 |
| GHR161B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-010, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-010 record remains the picking reference.
For trade item 6206-010, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6206-010 on the packing instruction.
Frequently Asked Questions
How should item 6206-010 and blower number GHR161B10 be verified?
Match 6206-010 to the complete GHR161B10 marking, then compare the 6206-010 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-010 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-010; confirm steering position, climate-control specification and the original 6206-010 geometry before approval.
What circuit checks are useful when 6206-010 does not operate?
For 6206-010, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-010 motor again.
Which details should accompany a wholesale request for 6206-010?
Provide item 6206-010, OE GHR161B10, the stated application, quantity and destination; add 6206-010 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-010?
Clear debris from the air inlet, check that the 6206-010 wheel turns freely, seat the 6206-010 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-010: Send GHR161B10, the 6206-010 application and required quantity for a fitment and supply review.
