UC9P-61-D80 Blower Motor for MAZDA BT-50 2015
Primary OE reference: UC9P-61-D80
Cross-reference 1: 264457
Cross-reference 2: 971133X700
Cross-reference 3: 971132Y500
Cross-reference 4: 87816
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA BT-50 2015
Brand: MAZDA
Model: BT-50
Vehicle year: 2015
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
UC9P-61-D80 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use UC9P-61-D80 together with the UC9P-61-D80 product images and vehicle data on this page.
For catalogue item 6206-007, the UC9P-61-D80 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6206-007 when comparing this UC9P-61-D80 airflow configuration.
OE Reference and Application
The primary catalogue number is UC9P-61-D80. The recorded application is MAZDA BT-50 2015. For 6206-007, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6206-007 with the approved OE reference.
HVAC Interface and UC9P-61-D80 installation
During work on 6206-007, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6206-007 before the lower trim is closed.
For item 6206-007, confirm that the UC9P-61-D80 centrifugal wheel clears its housing and that the 6206-007 connector lock engages without force. After seating 6206-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | UC9P-61-D80 |
| Cross-reference numbers | 264457 / 971133X700 / 971132Y500 / 87816 |
| Vehicle brand | MAZDA |
| Vehicle model | BT-50 |
| Model year | 2015 |
| UC9P-61-D80 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-007, Packing preparation accounts for the UC9P-61-D80 motor weight and wheel shape to reduce movement inside the carton. The 6206-007 record remains the picking reference.
For trade item 6206-007, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6206-007 on the packing instruction.
Frequently Asked Questions
How should item 6206-007 and blower number UC9P-61-D80 be verified?
Match 6206-007 to the complete UC9P-61-D80 marking, then compare the 6206-007 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-007 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-007; confirm steering position, climate-control specification and the original 6206-007 geometry before approval.
What circuit checks are useful when 6206-007 does not operate?
For 6206-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-007 motor again.
Which details should accompany a wholesale request for 6206-007?
Provide item 6206-007, OE UC9P-61-D80, the stated application, quantity and destination; add 6206-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-007?
Clear debris from the air inlet, check that the 6206-007 wheel turns freely, seat the 6206-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-007: Send UC9P-61-D80, the 6206-007 application and required quantity for a fitment and supply review.
