ZFF-11546DA Blower Motor for MAZDA 6
Primary OE reference: ZFF-11546DA
Cross-reference 1: GS1D61B10
Cross-reference 2: 872700-0361
Cross-reference 3: 872700-0362
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 6
Brand: MAZDA
Model: 6
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
ZFF-11546DA Automotive Blower Motor Overview
This listing links ZFF-11546DA with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-001, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-001 when comparing this ZFF-11546DA airflow configuration.
OE Reference and Application
The primary catalogue number is ZFF-11546DA. The recorded application is MAZDA 6. For 6206-001, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-001 with the approved OE reference.
HVAC Interface and ZFF-11546DA installation
During work on 6206-001, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after ZFF-11546DA installation. Recheck 6206-001 before the lower trim is closed.
For item 6206-001, confirm that the ZFF-11546DA centrifugal wheel clears its housing and that the 6206-001 connector lock engages without force. After seating 6206-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | ZFF-11546DA |
| Cross-reference numbers | GS1D61B10 / 872700-0361 / 872700-0362 |
| Vehicle brand | MAZDA |
| Vehicle model | 6 |
| Model year | Confirm by OE reference |
| ZFF-11546DA installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-001, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-001 record remains the picking reference.
For trade item 6206-001, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6206-001 on the packing instruction.
Frequently Asked Questions
How should item 6206-001 and blower number ZFF-11546DA be verified?
Match 6206-001 to the complete ZFF-11546DA marking, then compare the 6206-001 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-001 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-001; confirm steering position, climate-control specification and the original 6206-001 geometry before approval.
What circuit checks are useful when 6206-001 does not operate?
For 6206-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-001 motor again.
Which details should accompany a wholesale request for 6206-001?
Provide item 6206-001, OE ZFF-11546DA, the stated application, quantity and destination; add 6206-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-001?
Clear debris from the air inlet, check that the 6206-001 wheel turns freely, seat the 6206-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-001: Send ZFF-11546DA, the 6206-001 application and required quantity for a fitment and supply review.
