27220-2Y900 Blower Motor for NISSAN Sentra
Primary OE reference: 27220-2Y900
Cross-reference 1: 27220-VB201
Cross-reference 2: ME733724
Cross-reference 3: IS-B0101A
Cross-reference 4: 10010
Cross-reference 5: 3L041-30370
Cross-reference 6: 27220-5E900
Cross-reference 7: 27220-VB002
Cross-reference 8: 27220-2Y910
Cross-reference 9: 272209W100
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Sentra
Brand: NISSAN
Model: Sentra
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27220-2Y900 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 27220-2Y900 together with the 27220-2Y900 product images and vehicle data on this page.
For catalogue item 6205-038, the 27220-2Y900 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-038 when comparing this 27220-2Y900 airflow configuration.
OE Reference and Application
The primary catalogue number is 27220-2Y900. The recorded application is NISSAN Sentra. For 6205-038, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-038 with the approved OE reference.
HVAC Interface and 27220-2Y900 installation
During work on 6205-038, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-038 before the lower trim is closed.
For item 6205-038, confirm that the 27220-2Y900 centrifugal wheel clears its housing and that the 6205-038 connector lock engages without force. After seating 6205-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-038.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27220-2Y900 |
| Cross-reference numbers | 27220-VB201 / ME733724 / IS-B0101A / 10010 / 3L041-30370 / 27220-5E900 / 27220-VB002 / 27220-2Y910 / 272209W100 |
| Vehicle brand | NISSAN |
| Vehicle model | Sentra |
| Model year | Confirm by OE reference |
| 27220-2Y900 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-038, Packing preparation accounts for the 27220-2Y900 motor weight and wheel shape to reduce movement inside the carton. The 6205-038 record remains the picking reference.
For trade item 6205-038, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6205-038 on the packing instruction.
Frequently Asked Questions
How should item 6205-038 and blower number 27220-2Y900 be verified?
Match 6205-038 to the complete 27220-2Y900 marking, then compare the 6205-038 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-038 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-038; confirm steering position, climate-control specification and the original 6205-038 geometry before approval.
What circuit checks are useful when 6205-038 does not operate?
For 6205-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-038 motor again.
Which details should accompany a wholesale request for 6205-038?
Provide item 6205-038, OE 27220-2Y900, the stated application, quantity and destination; add 6205-038 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-038?
Clear debris from the air inlet, check that the 6205-038 wheel turns freely, seat the 6205-038 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-038: Send 27220-2Y900, the 6205-038 application and required quantity for a fitment and supply review.
