27226-1HMOA-DB Blower Motor for NISSAN March 2012-2014
Primary OE reference: 27226-1HMOA-DB
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN March 2012-2014
Brand: NISSAN
Model: March
Vehicle year: 2012-2014
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226-1HMOA-DB Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 27226-1HMOA-DB for application-led sourcing.
For catalogue item 6205-018, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-018 when comparing this 27226-1HMOA-DB airflow configuration.
OE Reference and Application
The primary catalogue number is 27226-1HMOA-DB. The recorded application is NISSAN March 2012-2014. For 6205-018, Measure the 27226-1HMOA-DB wheel height and outer diameter, then compare the electrical socket and base contour with the 27226-1HMOA-DB product photos. Record 6205-018 with the approved OE reference.
HVAC Interface and 27226-1HMOA-DB installation
During work on 6205-018, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 27226-1HMOA-DB installation. Recheck 6205-018 before the lower trim is closed.
For item 6205-018, confirm that the 27226-1HMOA-DB centrifugal wheel clears its housing and that the 6205-018 connector lock engages without force. After seating 6205-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226-1HMOA-DB |
| Cross-reference numbers | 27226-1HMOA-DB |
| Vehicle brand | NISSAN |
| Vehicle model | March |
| Model year | 2012-2014 |
| 27226-1HMOA-DB installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-018, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-018 record remains the picking reference.
For trade item 6205-018, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6205-018 on the packing instruction.
Frequently Asked Questions
How should item 6205-018 and blower number 27226-1HMOA-DB be verified?
Match 6205-018 to the complete 27226-1HMOA-DB marking, then compare the 6205-018 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-018 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-018; confirm steering position, climate-control specification and the original 6205-018 geometry before approval.
What circuit checks are useful when 6205-018 does not operate?
For 6205-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-018 motor again.
Which details should accompany a wholesale request for 6205-018?
Provide item 6205-018, OE 27226-1HMOA-DB, the stated application, quantity and destination; add 6205-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-018?
Clear debris from the air inlet, check that the 6205-018 wheel turns freely, seat the 6205-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-018: Send 27226-1HMOA-DB, the 6205-018 application and required quantity for a fitment and supply review.
