27226JY10A Blower Motor for NISSAN Koleos
Primary OE reference: 27226JY10A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Koleos
Brand: NISSAN
Model: Koleos
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226JY10A Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 27226JY10A to support OE-number comparison before purchase.
For catalogue item 6205-013, Cabin 27226JY10A airflow depends on the 27226JY10A motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-013 when comparing this 27226JY10A airflow configuration.
OE Reference and Application
The primary catalogue number is 27226JY10A. The recorded application is NISSAN Koleos. For 6205-013, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-013 with the approved OE reference.
HVAC Interface and 27226JY10A installation
During work on 6205-013, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-013 before the lower trim is closed.
For item 6205-013, confirm that the 27226JY10A centrifugal wheel clears its housing and that the 6205-013 connector lock engages without force. After seating 6205-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-013.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226JY10A |
| Cross-reference numbers | 27226JY10A |
| Vehicle brand | NISSAN |
| Vehicle model | Koleos |
| Model year | Confirm by OE reference |
| 27226JY10A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-013 record remains the picking reference.
For trade item 6205-013, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-013 on the packing instruction.
Frequently Asked Questions
How should item 6205-013 and blower number 27226JY10A be verified?
Match 6205-013 to the complete 27226JY10A marking, then compare the 6205-013 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-013 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-013; confirm steering position, climate-control specification and the original 6205-013 geometry before approval.
What circuit checks are useful when 6205-013 does not operate?
For 6205-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-013 motor again.
Which details should accompany a wholesale request for 6205-013?
Provide item 6205-013, OE 27226JY10A, the stated application, quantity and destination; add 6205-013 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-013?
Clear debris from the air inlet, check that the 6205-013 wheel turns freely, seat the 6205-013 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-013: Send 27226JY10A, the 6205-013 application and required quantity for a fitment and supply review.
