27226-6LA0A-B250 Blower Motor for NISSAN Sylphy 2019
Primary OE reference: 27226-6LA0A-B250
Cross-reference 1: 27226-6LA0A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Sylphy 2019
Brand: NISSAN
Model: Sylphy
Vehicle year: 2019
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226-6LA0A-B250 Automotive Blower Motor Overview
This product entry documents the 27226-6LA0A-B250 blower unit with practical identification and 27226-6LA0A-B250 installation checkpoints.
For catalogue item 6205-010, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 27226-6LA0A-B250 blower important at idle and in traffic. Use 6205-010 when comparing this 27226-6LA0A-B250 airflow configuration.
OE Reference and Application
The primary catalogue number is 27226-6LA0A-B250. The recorded application is NISSAN Sylphy 2019. For 6205-010, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-010 with the approved OE reference.
HVAC Interface and 27226-6LA0A-B250 installation
During work on 6205-010, After 27226-6LA0A-B250 installation, operate low through high speed and confirm 27226-6LA0A-B250 airflow reaches the selected vents without abnormal vibration. Recheck 6205-010 before the lower trim is closed.
For item 6205-010, confirm that the 27226-6LA0A-B250 centrifugal wheel clears its housing and that the 6205-010 connector lock engages without force. After seating 6205-010, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-010.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226-6LA0A-B250 |
| Cross-reference numbers | 27226-6LA0A |
| Vehicle brand | NISSAN |
| Vehicle model | Sylphy |
| Model year | 2019 |
| 27226-6LA0A-B250 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-010, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-010 record remains the picking reference.
For trade item 6205-010, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-010 on the packing instruction.
Frequently Asked Questions
How should item 6205-010 and blower number 27226-6LA0A-B250 be verified?
Match 6205-010 to the complete 27226-6LA0A-B250 marking, then compare the 6205-010 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-010 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-010; confirm steering position, climate-control specification and the original 6205-010 geometry before approval.
What circuit checks are useful when 6205-010 does not operate?
For 6205-010, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-010 motor again.
Which details should accompany a wholesale request for 6205-010?
Provide item 6205-010, OE 27226-6LA0A-B250, the stated application, quantity and destination; add 6205-010 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-010?
Clear debris from the air inlet, check that the 6205-010 wheel turns freely, seat the 6205-010 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-010: Send 27226-6LA0A-B250, the 6205-010 application and required quantity for a fitment and supply review.
