27226JE20A-A129 Blower Motor for NISSAN Qashqai
Primary OE reference: 27226JE20A-A129
Cross-reference 1: 27226JY10A
Cross-reference 2: 87415
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Qashqai
Brand: NISSAN
Model: Qashqai
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226JE20A-A129 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 27226JE20A-A129 to support OE-number comparison before purchase.
For catalogue item 6205-007, Cabin 27226JE20A-A129 airflow depends on the 27226JE20A-A129 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-007 when comparing this 27226JE20A-A129 airflow configuration.
OE Reference and Application
The primary catalogue number is 27226JE20A-A129. The recorded application is NISSAN Qashqai. For 6205-007, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-007 with the approved OE reference.
HVAC Interface and 27226JE20A-A129 installation
During work on 6205-007, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-007 before the lower trim is closed.
For item 6205-007, confirm that the 27226JE20A-A129 centrifugal wheel clears its housing and that the 6205-007 connector lock engages without force. After seating 6205-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226JE20A-A129 |
| Cross-reference numbers | 27226JY10A / 87415 |
| Vehicle brand | NISSAN |
| Vehicle model | Qashqai |
| Model year | Confirm by OE reference |
| 27226JE20A-A129 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-007, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-007 record remains the picking reference.
For trade item 6205-007, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-007 on the packing instruction.
Frequently Asked Questions
How should item 6205-007 and blower number 27226JE20A-A129 be verified?
Match 6205-007 to the complete 27226JE20A-A129 marking, then compare the 6205-007 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-007 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-007; confirm steering position, climate-control specification and the original 6205-007 geometry before approval.
What circuit checks are useful when 6205-007 does not operate?
For 6205-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-007 motor again.
Which details should accompany a wholesale request for 6205-007?
Provide item 6205-007, OE 27226JE20A-A129, the stated application, quantity and destination; add 6205-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-007?
Clear debris from the air inlet, check that the 6205-007 wheel turns freely, seat the 6205-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-007: Send 27226JE20A-A129, the 6205-007 application and required quantity for a fitment and supply review.
