UR8391B10 Blower Motor for FORD Ranger
Primary OE reference: UR8391B10
Cross-reference 1: 6M3418527DA
Cross-reference 2: 1505611
Cross-reference 3: UR8361B10
Cross-reference 4: 9711307000
Cross-reference 5: 715263
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Ranger
Brand: FORD
Model: Ranger
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
UR8391B10 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference UR8391B10 for application-led sourcing.
For catalogue item 6203-083, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-083 when comparing this UR8391B10 airflow configuration.
OE Reference and Application
The primary catalogue number is UR8391B10. The recorded application is FORD Ranger. For 6203-083, Measure the UR8391B10 wheel height and outer diameter, then compare the electrical socket and base contour with the UR8391B10 product photos. Record 6203-083 with the approved OE reference.
HVAC Interface and UR8391B10 installation
During work on 6203-083, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after UR8391B10 installation. Recheck 6203-083 before the lower trim is closed.
For item 6203-083, confirm that the UR8391B10 centrifugal wheel clears its housing and that the 6203-083 connector lock engages without force. After seating 6203-083, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-083.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | UR8391B10 |
| Cross-reference numbers | 6M3418527DA / 1505611 / UR8361B10 / 9711307000 / 715263 |
| Vehicle brand | FORD |
| Vehicle model | Ranger |
| Model year | Confirm by OE reference |
| UR8391B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-083, Packing preparation accounts for the UR8391B10 motor weight and wheel shape to reduce movement inside the carton. The 6203-083 record remains the picking reference.
For trade item 6203-083, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6203-083 on the packing instruction.
Frequently Asked Questions
How should item 6203-083 and blower number UR8391B10 be verified?
Match 6203-083 to the complete UR8391B10 marking, then compare the 6203-083 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-083 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-083; confirm steering position, climate-control specification and the original 6203-083 geometry before approval.
What circuit checks are useful when 6203-083 does not operate?
For 6203-083, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-083 motor again.
Which details should accompany a wholesale request for 6203-083?
Provide item 6203-083, OE UR8391B10, the stated application, quantity and destination; add 6203-083 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-083?
Clear debris from the air inlet, check that the 6203-083 wheel turns freely, seat the 6203-083 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-083: Send UR8391B10, the 6203-083 application and required quantity for a fitment and supply review.
