97113-3X700 Blower Motor for HYUNDAI i30 2011-2015
Primary OE reference: 97113-3X700
Cross-reference 1: F0053B2445
Cross-reference 2: AB3919847AA
Cross-reference 3: 971132Y500
Cross-reference 4: 715079
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI i30 2011-2015
Brand: HYUNDAI
Model: i30
Vehicle year: 2011-2015
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-3X700 Automotive Blower Motor Overview
YoonShan catalogues 97113-3X700 as an HVAC 97113-3X700 airflow component for workshops, distributors and export buyers.
For catalogue item 6202-028, When the climate-control circuit commands 97113-3X700 airflow, the electric motor rotates the 97113-3X700 fan wheel inside the HVAC housing. Use 6202-028 when comparing this 97113-3X700 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-3X700. The recorded application is HYUNDAI i30 2011-2015. For 6202-028, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed HYUNDAI unit. Record 6202-028 with the approved OE reference.
HVAC Interface and 97113-3X700 installation
During work on 6202-028, If 97113-3X700 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 97113-3X700 motor is the only cause. Recheck 6202-028 before the lower trim is closed.
For item 6202-028, confirm that the 97113-3X700 centrifugal wheel clears its housing and that the 6202-028 connector lock engages without force. After seating 6202-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-028.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-3X700 |
| Cross-reference numbers | F0053B2445 / AB3919847AA / 971132Y500 / 715079 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i30 |
| Model year | 2011-2015 |
| 97113-3X700 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-028, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6202-028 record remains the picking reference.
For trade item 6202-028, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6202-028 on the packing instruction.
Frequently Asked Questions
How should item 6202-028 and blower number 97113-3X700 be verified?
Match 6202-028 to the complete 97113-3X700 marking, then compare the 6202-028 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-028 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-028; confirm steering position, climate-control specification and the original 6202-028 geometry before approval.
What circuit checks are useful when 6202-028 does not operate?
For 6202-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-028 motor again.
Which details should accompany a wholesale request for 6202-028?
Provide item 6202-028, OE 97113-3X700, the stated application, quantity and destination; add 6202-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-028?
Clear debris from the air inlet, check that the 6202-028 wheel turns freely, seat the 6202-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-028: Send 97113-3X700, the 6202-028 application and required quantity for a fitment and supply review.
