33901-TP6-306 Fog Light for HONDA Crosstour 2011 Right
Primary OE reference: 33901-TP6-306
Product type: Fog Light
Applicable vehicle: HONDA Crosstour 2011
Installation position: Rear bumper
Installation side: Right
Brand: HONDA
Model: Crosstour
Vehicle year: 2011
Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.
Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.
Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.
Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.
Lighting version: Identify the original lighting version before selecting halogen, LED or multi-function variants.
Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.
Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.
33901-TP6-306 Fog Light Product Overview
For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 33901-TP6-306 is catalogued as a fog light for HONDA Crosstour 2011, installed at the right rear bumper position.
33901-TP6-306 — Product Function for the Listed Vehicle
A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 33901-TP6-306 on the listed Crosstour, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU HD04002-016.
For SKU HD04002-016, state the destination, quantity and preferred packaging. Quoting 33901-TP6-306 with the HONDA Crosstour 2011 and right position helps separate lighting-technology and model-year variants during packing.
HD04002-016 — Fitment Evidence to Compare
Start with the full reference 33901-TP6-306; then verify that the listed side matches the vehicle. Item HD04002-016 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.
33901-TP6-306 — Lighting Hardware Details
Use the 33901-TP6-306 page photographs to inspect lens clarity and reflector geometry. For electrical compatibility on SKU HD04002-016, review the vehicle circuit if the existing lamp has intermittent output and confirm the plug reaches its locked position without modification.
HD04002-016 — Installation Sequence
Before securing 33901-TP6-306, inspect damaged brackets before installing the replacement. After connecting SKU HD04002-016, test its stated lighting function and check alignment, clearance and harness routing around the rear bumper area.
Automotive Lighting Product Specifications
| Product type | Fog Light |
|---|---|
| Primary OE reference | 33901-TP6-306 |
| Cross-reference numbers | 33901-TP6-306 |
| Internal item code | HD04002-016 |
| Vehicle brand | HONDA |
| Vehicle model | Crosstour |
| Model year | 2011 |
| Installation position | Rear bumper |
| Installation side | Right |
| Lighting version | Match the photographed configuration |
| Product function | Vehicle exterior lighting for the stated bumper position |
Wholesale Supply and Protective Packing
For 33901-TP6-306, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU HD04002-016, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.
Frequently Asked Questions
How should 33901-TP6-306 be installed?
For item HD04002-016, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.
What should be checked on the connector for 33901-TP6-306?
Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Crosstour application.
How do I confirm 33901-TP6-306 for my vehicle?
Match 33901-TP6-306, the right position, vehicle year, housing depth, mounting ears and electrical connector with the original HONDA lamp.
Why compare the bumper opening for 33901-TP6-306?
SKU HD04002-016 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.
Can model year alone confirm 33901-TP6-306 fitment?
No. For SKU HD04002-016, vehicles built in the same year can use different lighting packages, so use 33901-TP6-306 and the removed lamp geometry as the primary evidence.
Request a Product-Specific Quote
Send the complete OE reference 33901-TP6-306, internal number HD04002-016, vehicle details, side, quantity and destination. Yongshang Auto can review the photographed configuration before preparing a trade quotation.
