7G91-10A659-AE Battery Cover for 2008-2012 Ford Mondeo
Primary OE reference: 7G91-10A659-AE
Cross-reference 1: 7G91-10A659-AE
Product type: Battery Cover
Applicable vehicle: 2008-2012 FORD Mondeo
Installation position: Upper battery enclosure
Brand: FORD
Model: Mondeo
Vehicle year: 2008-2012
Identification detail: Mondeo cover panel with broad top surface and model-specific edge locks
Fitment verification: Confirm 7G91-10A659-AE, battery size, cable exits, clip pattern and mounting geometry.
Installation guidance: Disconnect the battery safely, dry-fit the component and ensure no terminal, cable or ventilation path is trapped.
Purchase reference: Quote SKU FD02044-023, OE number, battery layout, vehicle application and quantity.
7G91-10A659-AE Battery Cover Overview
Battery Cover 7G91-10A659-AE serves the stated FORD battery-area application. The cover protects the battery top across the stated Mondeo model years and must clear the original cable layout.
Battery-Area Fitment Identification
Compare Mondeo cover panel with broad top surface and model-specific edge locks. Check the battery footprint, terminal orientation, cable reliefs and every concealed locating point; a cover that looks similar from above may use a different lower interface.
Safe Installation Preparation
Remove loose debris from the battery area and preserve original insulators or drain pieces. Trial-fit 7G91-10A659-AE, confirm terminal clearance and secure it only after cables lie naturally in their intended channels.
Post-Installation Function Check
Complete a visual check around the entire enclosure. Leads should have relaxed bends, covers should sit flush and any thermal barrier should remain outside the clamp and terminal contact zones.
Mondeo Cable Exit Layout
The Mondeo cover spans a wide battery area, so all perimeter locks must begin together. Guide cables through the factory reliefs and ensure the cover does not press on terminal protection. The broad face should remain flat after installation, with no corner lifted by a trapped loom.
Automotive Replacement Part Specifications
| Product type | Battery Cover |
|---|---|
| Primary OE reference | 7G91-10A659-AE |
| Internal item code | FD02044-023 |
| Vehicle brand | FORD |
| Model | Mondeo |
| Vehicle year | 2008-2012 |
| Applicable vehicle | 2008-2012 FORD Mondeo |
| Installation position | Upper battery enclosure |
| Identification detail | Mondeo cover panel with broad top surface and model-specific edge locks |
| Cross-reference numbers | 7G91-10A659-AE |
Warehouse Packing and Supply
Protect moulded corners, clip tabs and thermal surfaces from stacking pressure. Label the carton with FD02044-023, 7G91-10A659-AE, vehicle application and battery-area position.
Frequently Asked Questions
What does 7G91-10A659-AE identify?
7G91-10A659-AE identifies the listed battery cover for 2008-2012 FORD Mondeo.
How should SKU FD02044-023 be matched?
Compare Mondeo cover panel with broad top surface and model-specific edge locks, battery layout, cable openings and all attachment points.
Must the battery be disconnected?
Yes. Follow the vehicle manufacturer’s isolation and reconnection procedure before working around terminals.
What should be checked after installation?
Confirm secure seating, cable clearance, terminal protection, ventilation and drainage.
What information supports a wholesale quotation?
Provide 7G91-10A659-AE, SKU FD02044-023, vehicle details, destination and quantity.
