4B0-601-170-H Wheel Center Cap for 2003 Audi A6
Primary OE reference: 4B0 601 170 H
Cross-reference 1: 4B0 601 170 H
Product type: Wheel Center Cap
Applicable vehicle: 2003 AUDI A6
Installation position: Centre of the road wheel
Brand: AUDI
Model: A6
Vehicle year: 2003
Identification detail: large disc-style wheel cover with Audi-specific retention geometry
Fitment verification: Confirm 4B0 601 170 H, cap diameter, wheel opening, rear tab layout and insertion depth.
Installation guidance: Clean the wheel recess, align every tab and press evenly around the perimeter without striking the decorated face.
Purchase reference: Quote SKU AD02043-002, OE number, wheel design, vehicle application and quantity.
4B0 601 170 H Wheel Center Cap Overview
4B0 601 170 H identifies the listed wheel center cap for 2003 AUDI A6. This 2003 A6 version finishes the wheel centre and conceals the hub fastener area while remaining removable for service.
Wheel and Cap Identification
Compare the diameter across the outer rim, the rear clip spacing and the depth of the centre recess. The H suffix should remain part of the identification because related 4B0 covers can differ behind the visible face.
Removal and Installation
Remove the old cap with a plastic trim tool from a supported edge. Clean accumulated grit from the wheel recess, then align the replacement so all retaining elements begin entering together.
Finish Care and Wheel Service
Use pH-neutral wheel cleaner and a soft cloth on the visible surface. Strong acid, stiff brushes and direct high-pressure spray at the edge can shorten the life of the finish and retention hardware.
Product-Specific Stock Control
Stock SKU AD02043-002 with 4B0 601 170 H, AUDI A6, 2003 and the wheel-centre location on one label. Separate close-looking cap diameters and keep rear clips protected from bin pressure. Compare the diameter across the outer rim, the rear clip spacing and the depth of the centre recess. The H suffix should remain part of the identification because related 4B0 covers can differ behind the visible face.
Automotive Replacement Part Specifications
| Product type | Wheel Center Cap |
|---|---|
| Primary OE reference | 4B0 601 170 H |
| Internal item code | AD02043-002 |
| Vehicle brand | AUDI |
| Model | A6 |
| Vehicle year | 2003 |
| Applicable vehicle | 2003 AUDI A6 |
| Installation position | Centre of the road wheel |
| Identification detail | large disc-style wheel cover with Audi-specific retention geometry |
| Cross-reference numbers | 4B0 601 170 H |
Trade Packing and Supply
Use a non-abrasive sleeve over the decorated face and support the rear clips so they cannot be flattened. Label the carton with AD02043-002, 4B0 601 170 H and the applicable wheel position.
Frequently Asked Questions
What does 4B0 601 170 H identify?
4B0 601 170 H identifies the listed wheel center cap for 2003 AUDI A6.
What should be measured for AD02043-002?
Compare the visible diameter, wheel recess, rear tab circle, clip count and insertion depth.
Is the emblem face enough to confirm fitment?
No. Different wheel designs can share a similar face while using different rear retention geometry.
How should the cap be installed?
Clean the recess, align every clip and apply even hand pressure around the perimeter.
What information supports a wholesale quotation?
Provide 4B0 601 170 H, SKU AD02043-002, wheel design, destination and quantity.
