W708680-S442 Radiator Support Adjusting Nut for 2012 Ford Focus
Primary OE reference: W708680-S442
Cross-reference 1: W708680-S442
Product type: Radiator Support Adjusting Nut
Applicable vehicle: 2012 FORD Focus
Installation position: Radiator frame alignment point
Brand: FORD
Model: Focus
Vehicle year: 2012
Identification detail: adjustment fastener with a formed bearing and locating profile
Fitment basis: Match W708680-S442, thread or hole size, shoulder length and contact surface.
Installation guidance: Start the fastener by hand and apply the vehicle maker’s specified tightening method.
Purchase reference: Quote SKU FD02042-006, OE number, vehicle application and quantity.
W708680-S442 Radiator Support Adjusting Nut Overview
Radiator Support Adjusting Nut W708680-S442 serves the radiator frame alignment point on the stated FORD application. It supports controlled frame positioning so panel and cooling-module clearances can be set during assembly.
Product-Specific Fitment
Use the product photographs to compare adjustment fastener with a formed bearing and locating profile. Inspect the mating stud, bracket or body opening because a similar-looking fastener may have a different pitch, shoulder or locating depth.
Workshop Installation Method
Clean the mating thread and start W708680-S442 without power tools. If resistance is felt before seating, stop and check pitch alignment; cross-threading can damage the retained component.
Functional Check After Assembly
After fitting, check that the supported component remains stable through its normal movement and temperature range. Recheck access for later service and verify nearby hoses or wiring are not pinched.
Warehouse Identification
Store SKU FD02042-006 under W708680-S442 with the FORD Focus application and radiator frame alignment point recorded on the bin label. Keep small threaded pieces bagged separately; protect formed brackets from stacking loads that could change their geometry.
Frame Height Adjustment
This adjuster participates in radiator-frame positioning during front-end assembly. Record the original setting before removal, correct bent support metal, and use neighbouring panel references to establish height. The nut is not intended to compensate for unrepaired collision distortion.
Automotive Replacement Part Specifications
| Product type | Radiator Support Adjusting Nut |
|---|---|
| Primary OE reference | W708680-S442 |
| Internal item code | FD02042-006 |
| Vehicle brand | FORD |
| Model | Focus |
| Vehicle year | 2012 |
| Applicable vehicle | 2012 FORD Focus |
| Installation position | Radiator frame alignment point |
| Identification detail | adjustment fastener with a formed bearing and locating profile |
| Cross-reference numbers | W708680-S442 |
Packing and Trade Supply
Protect threads and exposed locating ends with sleeves or caps. Pack SKU FD02042-006 so finished faces and bracket bends cannot rub against loose hardware in transit.
Frequently Asked Questions
What does W708680-S442 identify?
W708680-S442 identifies the stated radiator support adjusting nut for 2012 FORD Focus.
Which features should be compared for FD02042-006?
Check adjustment fastener with a formed bearing and locating profile, then verify every thread, shoulder, hole and contact face.
Can a similar fastener be substituted?
Only after confirming dimensions, material function and the load carried by the mounting point.
What installation practice is recommended?
Start by hand and use the manufacturer-specified torque and sequence.
What information is required for wholesale supply?
Provide W708680-S442, SKU FD02042-006, vehicle details, destination and order quantity.
