8K1-857-131A Glove Box Release Switch for 2009 Audi A4
Primary OE reference: 8K1 857 131A
Cross-reference 1: 8K1 857 131A
Product type: Glove Box Release Switch
Applicable vehicle: 2009 AUDI A4
Installation position: Passenger-side glove compartment
Brand: AUDI
Model: A4
Vehicle year: 2009
Identification detail: release actuator with the aperture configuration shown in the product images
Fitment basis: Confirm 8K1 857 131A, connector or latch layout, mounting points and enclosure profile.
Installation guidance: Dry-fit the component, engage every locating tab and confirm cables or seals are not trapped.
Purchase reference: Quote SKU AD02040-002, OE number, vehicle application and required quantity.
8K1 857 131A Glove Box Release Switch Overview
Reference 8K1 857 131A identifies the listed glove box release switch for the 2009 AUDI A4. This variant includes the visible opening recorded for the A4 glove-box mechanism; compare it with the removed latch before ordering.
Component Identification
Before replacement, compare release actuator with the aperture configuration shown in the product images. A correct match should sit naturally at the passenger-side glove compartment without forcing nearby harnesses, trim or brackets.
Enclosure and Retention Details
Clean the mating rim and identify every clip before fitting 8K1 857 131A. Replace damaged retainers; uneven engagement can leave the enclosure open to moisture or vibration.
Workshop Stock Control
For workshop stock control, label AD02040-002 with 8K1 857 131A, AUDI A4 and the exact installation area. Keep the component separated from visually similar electrical housings.
Mounting and Harness Routing
After connection, verify the relevant vehicle signal with a diagnostic scan and confirm the harness is secured away from heat and moving parts.
Automotive Replacement Part Specifications
| Product type | Glove Box Release Switch |
|---|---|
| Primary OE reference | 8K1 857 131A |
| Internal item code | AD02040-002 |
| Vehicle brand | AUDI |
| Model | A4 |
| Vehicle year | 2009 |
| Applicable vehicle | 2009 AUDI A4 |
| Installation position | Passenger-side glove compartment |
| Identification detail | release actuator with the aperture configuration shown in the product images |
| Cross-reference numbers | 8K1 857 131A |
Packaging and Wholesale Supply
Protect the connector, clips, sealing rim and moulded corners during packing. Mark the carton with AD02040-002, 8K1 857 131A and Passenger-side glove compartment so warehouse staff can distinguish the correct variant.
Frequently Asked Questions
What does 8K1 857 131A identify?
8K1 857 131A identifies the listed glove box release switch for the 2009 AUDI A4.
How should AD02040-002 be matched?
Compare the OE reference, release actuator with the aperture configuration shown in the product images, installation location and all concealed attachment details.
Is visual similarity enough for selection?
No. Similar electrical covers and sensors can use different connectors, clips, seals or mounting geometry.
What should be checked after fitting?
Confirm full tab engagement, even edge seating and clearance around the wiring harness.
What details are needed for a trade quotation?
Provide 8K1 857 131A, SKU AD02040-002, vehicle model, model year, destination and quantity.
