75312-SWA-003 Front Right Door Lower Molding for 2007-2011 Honda CR-V
Primary OE reference: 75312-SWA-003
Cross-reference 1: 75312-SWA-003
Product type: Front Right Door Lower Molding
Applicable vehicle: 2007-2011 HONDA CR-V
Installation position: Front right door, lower exterior edge
Brand: HONDA
Model: CR-V
Vehicle year: 2007-2011
Component scope: Passenger-side lower door garnish shaped for the front door section.
Design cue: Long horizontal profile with a raised rear end and molded locating features.
Body interface: Compare the visible face, full length and lower-door contour with the removed molding.
Mounting profile: Check the reverse-side clip seats and end geometry against the factory attachment points.
Surface check: Confirm the finish and edge condition shown in the product images before installation.
Installation preparation: Clean the lower door mounting area and dry-fit the molding before engaging clips.
Receiving inspection: Inspect both ends, the outer face and all molded retainers after delivery.
Order information: Quote OE 75312-SWA-003, SKU HD02034-003, vehicle year and required quantity.
Front Door Lower Garnish Overview
OE reference 75312-SWA-003 identifies a passenger-side front lower door molding used on 2007-2011 Honda CR-V applications. Its long exterior profile completes the lower door line and should be selected by position rather than by appearance alone.
Exterior Profile and Retention
This garnish combines a visible horizontal face with concealed molded retainers on the reverse. Compare the end rise, overall sweep and clip-seat spacing with the original part so the panel follows the door skin without twisting.
Vehicle and Position Matching
Confirm a 2007-2011 CR-V, the front passenger door and the OE number before ordering. Left-side moldings have a mirrored shape, so interchangeability should never be assumed from length alone.
Automotive Replacement Part Specifications
| Product type | Front Right Door Lower Molding |
|---|---|
| Primary OE reference | 75312-SWA-003 |
| Internal item code | HD02034-003 |
| Vehicle brand | HONDA |
| Model | CR-V |
| Vehicle year | 2007-2011 |
| Application | 2007-2011 HONDA CR-V |
| Installation position | Front right door, lower exterior edge |
| Product form | Long molded exterior garnish |
| Cross-reference numbers | 75312-SWA-003 |
Workshop Preparation
Before fitting, remove loose debris from the lower door area and inspect every receiving hole. Place the molding against the body first, align the terminal ends, then seat the retainers evenly from one end to the other.
Supply Notes for Repair Buyers
For collision repair, fleet maintenance or wholesale enquiries, provide the OE reference together with the internal SKU and quantity. Photos of the removed front-right molding help confirm the correct contour when market versions differ.
Frequently Asked Questions
Which door uses 75312-SWA-003?
It is listed for the front right, or passenger-side, lower door position on applicable 2007-2011 Honda CR-V vehicles.
What should be compared before purchase?
Compare the OE number, door position, total length, raised end shape and reverse mounting points with the removed piece.
Is this the left-side molding?
No. The profile is for the front right door; the opposite side uses a mirrored component.
Should the part be dry-fitted?
Yes. A dry fit verifies the body contour and clip alignment before final seating.
What details help with a bulk quotation?
Send OE 75312-SWA-003, SKU HD02034-003, model years, destination and required quantity.
