8R0 807 285 L Front License Plate Bracket for 2013 AUDI Q5 (European specification)
Primary OE reference: 8R0 807 285 L
Cross-reference numbers: 8R0 807 285 L
Internal item code: AD02033-029
Product type: Front License Plate Bracket
Applicable vehicle: 2013 AUDI Q5
Installation position: Front
Brand: AUDI
Model: Q5
Vehicle year: 2013
Fitment verification: Match the OE number with the vehicle, model year and installation position before ordering.
Body interface: Compare the plate recess, outer contour and edge return with the removed bracket or the vehicle fascia.
Mounting points: Confirm the hole spacing, clip locations and fastener direction line up with the factory support.
Clearance check: Make sure the plate or lamp opening clears nearby trim, wiring and bumper surfaces after the part is seated.
Installation sequence: Dry-fit first, centre the opening, engage all locating tabs and tighten fasteners evenly without forcing the fascia.
8R0 807 285 L Front License Plate Bracket Overview
The Front plate-support area on 2013 AUDI Q5 uses the 8R0 807 285 L design shown here. Compare the shape around the plate recess, the attachment points and adjacent trim before approving the replacement.
Plate Bracket Function and Body Interface
A correct match will follow the Front fascia line and keep the plate or lamp area centred. Inspect the back-side guides and the visible edge before applying final fastening pressure.
OE Reference and Vehicle Matching
Match 8R0 807 285 L with SKU AD02033-029, the Front location and the listed model year (2013). If the vehicle has a market-specific bumper, use the OE label and a side-by-side photo to confirm the variant.
Product Specifications
| Product type | Front License Plate Bracket |
|---|---|
| Primary OE reference | 8R0 807 285 L |
| Internal item code | AD02033-029 |
| Vehicle brand | AUDI |
| Model | Q5 |
| Vehicle year | 2013 |
| Application | 2013 AUDI Q5 |
| Installation position | Front |
| Market / trim | European specification |
| Cross-reference numbers | 8R0 807 285 L |
Application-Specific Buying Notes
If the replacement is being refinished, compare the visible face and edge return before coating. The finish can vary by market, but the attachment geometry must remain consistent with 8R0 807 285 L.
For repeat orders, retain a reference photo showing the hole layout and lamp clearance. It gives purchasing and quality teams a practical check that is not captured by the vehicle name alone.
Installation and Inspection Notes
Clean the mating surface, place the support on the factory guides and check the edge gap from both sides. Tighten gradually so the fascia is not pulled out of alignment.
Wholesale Supply Context
A complete bulk request includes the application, OE reference, internal code and required count. If the customer is unsure of the trim, ask for a photo of the original bracket before confirming.
Frequently Asked Questions
How do I confirm the fitment for 8R0 807 285 L?
Check that 8R0 807 285 L, SKU AD02033-029, the 2013 AUDI Q5 application and the Front position all agree. Then compare the opening and fixing layout with the original part.
Is this a universal plate bracket?
No. It follows the body-side geometry listed for 2013 AUDI Q5; a universal-looking plate may still have different holes, clips or lamp clearance.
What should I compare before installation?
Compare the outer contour, edge return, hole or clip spacing and clearance to nearby lamps or trim. A dry fit should sit flush without forcing the fascia.
What details should a wholesale enquiry include?
Send the OE reference, internal SKU, vehicle and year, installation position, quantity, finish or market requirement and delivery destination.
Can the finish or market version change the selection?
It can change the visible trim or finish, while the mounting geometry must still match. Use European specification and the OE label as additional checks before ordering.
