74890-TF0-003 Rear License Plate Bracket for 2009 HONDA Fit
Primary OE reference: 74890-TF0-003
Cross-reference numbers: 74890-TF0-003
Internal item code: HD02033-032
Product type: Rear License Plate Bracket
Applicable vehicle: 2009 HONDA Fit
Installation position: Rear
Brand: HONDA
Model: Fit
Vehicle year: 2009
Fitment verification: Match the OE number with the vehicle, model year and installation position before ordering.
Body interface: Compare the plate recess, outer contour and edge return with the removed bracket or the vehicle fascia.
Mounting points: Confirm the hole spacing, clip locations and fastener direction line up with the factory support.
Clearance check: Make sure the plate or lamp opening clears nearby trim, wiring and bumper surfaces after the part is seated.
Installation sequence: Dry-fit first, centre the opening, engage all locating tabs and tighten fasteners evenly without forcing the fascia.
74890-TF0-003 Rear License Plate Bracket Overview
This Rear License Plate Bracket is catalogued under OE 74890-TF0-003 for 2009 HONDA Fit. Use the Rear opening, edge profile and retaining points as the first checks when comparing the replacement with the removed part.
Plate Bracket Function and Body Interface
The important interface is the transition between the Rear support and the body panel. A side-by-side check of the contour, hole spacing and lamp aperture will reveal a wrong market or bumper version.
OE Reference and Vehicle Matching
Use SKU HD02033-032 as the warehouse identifier and 74890-TF0-003 as the vehicle-side reference. Check the year and body version shown in the table before treating another number as interchangeable.
Product Specifications
| Product type | Rear License Plate Bracket |
|---|---|
| Primary OE reference | 74890-TF0-003 |
| Internal item code | HD02033-032 |
| Vehicle brand | HONDA |
| Model | Fit |
| Vehicle year | 2009 |
| Application | 2009 HONDA Fit |
| Installation position | Rear |
| Market / trim | Standard vehicle specification |
| Cross-reference numbers | 74890-TF0-003 |
Application-Specific Buying Notes
When stock is being consolidated, keep the original OE label with the part until the fascia version is verified. This is especially useful where the same model name was sold with different bumpers.
During inventory intake, count the support, inspect the locating tabs and record any finish variation. Link that note to 74890-TF0-003 so later replenishment uses the same reference.
Installation and Inspection Notes
Use the original mounting sequence and protect the visible face during handling. After fastening, inspect the opening perimeter and make sure no clip or screw head interferes with the plate or lamp.
Wholesale Supply Context
Bulk buyers should separate this Rear support from other body parts on the purchase order. Include 2009 HONDA Fit and the cross-reference 74890-TF0-003 when a customer uses a different catalogue system.
Frequently Asked Questions
How do I confirm the fitment for 74890-TF0-003?
Check that 74890-TF0-003, SKU HD02033-032, the 2009 HONDA Fit application and the Rear position all agree. Then compare the opening and fixing layout with the original part.
Is this a universal plate bracket?
No. It follows the body-side geometry listed for 2009 HONDA Fit; a universal-looking plate may still have different holes, clips or lamp clearance.
What should I compare before installation?
Compare the outer contour, edge return, hole or clip spacing and clearance to nearby lamps or trim. A dry fit should sit flush without forcing the fascia.
What details should a wholesale enquiry include?
Send the OE reference, internal SKU, vehicle and year, installation position, quantity, finish or market requirement and delivery destination.
Can the finish or market version change the selection?
It can change the visible trim or finish, while the mounting geometry must still match. Use Standard vehicle specification and the OE label as additional checks before ordering.
