71504-SFE-000 Tow Hook Cover Center Rear Bumper for 2005 HONDA Odyssey
Primary OE reference: 71504-SFE-000
Cross-reference 1: 71504-SFE-000
Product type: Tow Hook Cover
Applicable vehicle: 2005 HONDA Odyssey
Installation position: Center Rear Bumper Area
Brand: HONDA
Model: Odyssey
Vehicle year: 2005
Product form: Vehicle-specific molded bumper tow hook cover
Product identification: For warehouse control, label this tow hook cover with 71504-SFE-000 and internal code HD02032-054.
Engineering purpose: Follows the bumper or grille profile so the recovery-eye recess remains covered between service operations.
Fitment check: Confirm that any tether, hinge or snap direction follows the original part and is not mirrored.
Receiving and installation: Handle from supported molded areas rather than pulling on the tether or narrow retention features.
Wholesale enquiry: Bulk quotation is available when the required bumper version and full OE suffix are supplied.
Catalog context: The cover represented by 71504-SFE-000 restores the exterior surface at the Center Rear Bumper Area. Vehicle specification and bumper design should be confirmed before ordering or refinishing.
Selection note: Begin with 71504-SFE-000, then inspect the opening for left/right orientation, perimeter steps and clip receivers. A matching paint color is not sufficient evidence.
71504-SFE-000 Tow Hook Cover Overview
This listing organizes 71504-SFE-000, HD02032-054, 2005 HONDA Odyssey and Center Rear Bumper Area as one procurement record for a tow-hook access cover.
Tow Hook Cover Function and Molded Design
Because the component is small, a catalog image can hide meaningful differences. Clip spacing, flange width and corner radius should be compared at full scale.
OE, Vehicle and Position Matching
Confirm that the product type and actual opening agree, especially where a grille insert and a bumper skin use separate tow access covers.
Product Specifications
| Product type | Tow Hook Cover |
|---|---|
| Primary OE reference | 71504-SFE-000 |
| Internal item code | HD02032-054 |
| Vehicle brand | HONDA |
| Model | Odyssey |
| Vehicle year | 2005 |
| Application | 2005 HONDA Odyssey |
| Installation position | Center Rear Bumper Area |
| Product form | Vehicle-specific molded bumper tow hook cover |
| Cross-reference numbers | 71504-SFE-000 |
Receiving and Installation Guidance
Retain reusable hardware by position and replace cracked clips. Adhesive should not substitute for the attachment method specified by the vehicle design.
Wholesale and Distributor Supply
The minimum order enquiry for 71504-SFE-000 should identify units, consignee country and required dispatch date. Add VIN information when fitment remains uncertain.
Frequently Asked Questions
How can buyers confirm 71504-SFE-000 fits the vehicle?
Before refinishing, place the unpainted cover in the opening and confirm uniform gaps. Do not sand away retaining geometry to force an uncertain match.
What function does 71504-SFE-000 perform at the tow-eye opening?
The component is shaped as part of the bumper surface rather than as towing hardware. Its engineering requirements are accurate perimeter geometry, correct installed depth and secure removable retention.
Does 71504-SFE-000 fit every HONDA Odyssey?
Do not infer interchangeability from online images alone; OE data and concealed geometry should agree.
What should be inspected before installing 71504-SFE-000?
Clean the tow-eye recess and inspect the bumper receivers for damage. Engage fixed hooks first, align the perimeter, then press only over flexible clips until the cover sits evenly.
What information is needed for a wholesale quote on 71504-SFE-000?
Sample approval can be arranged before a volume release. The buyer should compare OE identity, back-side geometry and the actual recovery opening.
