80A 823 124 Center Hood Weatherstrip for 2018 AUDI Q5
Primary OE reference: 80A 823 124
Cross-reference 1: 80A 823 124
Product type: Center Hood Weatherstrip
Applicable vehicle: 2018 AUDI Q5
Installation position: Center Hood Edge
Brand: AUDI
Model: Q5
Vehicle year: 2018
Product form: Center-section hood sealing strip with integrated mounting features
Product identification: The center hood seal spans a dedicated section and should be checked against the complete curved mounting path.
Functional purpose: Forms the central hood-edge barrier that limits splash, dust and noise transfer into the engine compartment.
Fitment confirmation: Validate the center span, overall curve and clip pattern against the original hood sealing system.
Receiving inspection: Store the long center strip without tight coils, then confirm the carrier follows a smooth curve before workshop release.
Wholesale enquiry: Send the full reference and packaging-length limits; center hood seals should not be compressed into small cartons.
80A 823 124 Center Hood Weatherstrip Overview
OE 80A 823 124 identifies the center section of the hood-edge sealing system listed for the 2018 AUDI Q5. The long curved profile should be approved against the original mounting span and center orientation.
Central Hood-Edge Sealing and Compartment Isolation
Across the central hood edge, this strip helps restrict splash, airborne dust and engine-bay noise transfer through the panel gap. Its backing must follow the support contour so the sealing lip compresses consistently when the hood closes.
OE Reference and Application Verification
Check 80A 823 124, the center position and the Q5 production version. Compare total length, curvature, molded end transitions and each fastener location before purchase.
Product Specifications
| Product type | Center Hood Weatherstrip |
|---|---|
| Primary OE reference | 80A 823 124 |
| Internal item code | AD02030-004 |
| Vehicle brand | AUDI |
| Model | Q5 |
| Vehicle year | 2018 |
| Application | 2018 AUDI Q5 |
| Installation position | Center Hood Edge |
| Product form | Center-section hood sealing strip with integrated mounting features |
| Cross-reference numbers | 80A 823 124 |
Handling and Installation Guidance
Lay the new strip beside the original to establish orientation. Start from the center locating points, work outward without stretching and close the hood slowly to verify continuous, moderate compression.
Wholesale and Distributor Supply
Wholesale buyers should quote 80A 823 124 with volume, delivery country and packaging length restrictions. Long seals require supportive cartons rather than tight coils.
Frequently Asked Questions
How can buyers confirm 80A 823 124 fits the vehicle?
Check the center hood span, OE reference, total curvature and each mounting location against the original sealing system.
What is the function of 80A 823 124?
The center strip reduces open pathways for splash and dust and helps maintain a continuous soft boundary under the hood.
Is 80A 823 124 a universal replacement?
This center piece serves a different span from the left and right hood strips; all three references should remain separate in inventory.
What should be inspected before installing 80A 823 124?
Inspect the carrier for kinks, confirm end orientation and verify uniform compression after closing the hood slowly.
What information is needed for a wholesale quote on 80A 823 124?
Send 80A 823 124, required quantity, delivery country and maximum carton length or packing standard.
