28111-0X000 Air Filter Housing Upper Cover for 2007 HYUNDAI i10
Primary OE reference: 28111-0X000
Cross-reference 1: 28111-0X000
Product type: Air Filter Housing Upper Cover
Applicable vehicle: 2007 HYUNDAI i10
Installation position: Upper Air Filter Area
Brand: HYUNDAI
Model: i10
Vehicle year: 2007
Product form: Upper molded air-filter housing cover
Product identification: Reference 28111-0X000 separates this air filter housing upper cover from visually related housings fitted elsewhere on 2007 HYUNDAI i10.
Engineering purpose: Maintains the factory routing between neighboring components without requiring forced bends or improvised adapters.
Fitment check: Verify the Upper Air Filter Area position first; similar left, right, upper or lower housings may not interchange.
Receiving and installation: Compare the received unit with approved photos before discarding packaging or removing the old mounting clips.
Wholesale enquiry: Submit SKU HY02025-028, OE 28111-0X000, packing method and destination port to prepare an accurate offer.
Catalog context: OE 28111-0X000 is listed under internal code HY02025-028 for 2007 HYUNDAI i10. The supplied component belongs at the Upper Air Filter Area position, where its molded outline and connections distinguish it from nearby air-path parts.
Selection note: Use a direct physical comparison where possible: align the ports, mounting ears and outer contour of 28111-0X000 with the component removed from 2007 HYUNDAI i10.
28111-0X000 Air Filter Housing Upper Cover Overview
The molded air filter housing upper cover shown is referenced as 28111-0X000 for 2007 HYUNDAI i10. Its vehicle-side geometry, not only the general part name, determines whether SKU HY02025-028 is the correct choice.
Airflow Function and Molded Design
Airflow guidance depends on the original contour rather than a generic tube diameter alone. Ribs, flanges and transitions all contribute to how the part sits in the vehicle.
OE, Vehicle and Position Matching
Use a direct physical comparison where possible: align the ports, mounting ears and outer contour of 28111-0X000 with the component removed from 2007 HYUNDAI i10.
Product Specifications
| Product type | Air Filter Housing Upper Cover |
|---|---|
| Primary OE reference | 28111-0X000 |
| Internal item code | HY02025-028 |
| Vehicle brand | HYUNDAI |
| Model | i10 |
| Vehicle year | 2007 |
| Application | 2007 HYUNDAI i10 |
| Installation position | Upper Air Filter Area |
| Product form | Upper molded air-filter housing cover |
| Cross-reference numbers | 28111-0X000 |
Receiving and Installation Guidance
Keep protective caps or clean wrapping over openings until installation. Fit each connector squarely and verify that no edge is trapped beneath a neighboring panel.
Wholesale and Distributor Supply
Wholesale buyers can request samples or batch quantities by providing 28111-0X000, SKU HY02025-028, confirmed 2007 HYUNDAI i10 details, destination and packing preference. Clear application data reduces errors between related housings.
Frequently Asked Questions
How can buyers confirm 28111-0X000 fits the vehicle?
Compare HY02025-028 with the removed part from several angles, especially where it joins a housing or panel. Confirm 28111-0X000 in the catalog if the vehicle has optional equipment.
What is the purpose of 28111-0X000?
The panel or housing works with neighboring housings to control where air can travel. Its value comes from matching the intended boundary, orientation and clearances of the assembly.
Does 28111-0X000 fit every HYUNDAI i10?
A shared model name does not prove interchangeability. Check the exact 2007 HYUNDAI i10 configuration and compare the removed component with the gallery.
What should be inspected before installing 28111-0X000?
Check every thin edge and clip location for transit damage. Clean the mating surfaces and replace hardened seals so the connection can close evenly.
What information is needed for a wholesale quote on 28111-0X000?
Procurement teams should list 28111-0X000, model year, engine option and shipment destination. Mixed-side or mixed-position orders should identify each item separately.
