86832-3S000 Front Right Mudguard for HYUNDAI Sonata 2011-2013
Primary OE reference: 86832-3S000
Cross-reference 1: 86832-3S000
Product type: Front Right Mudguard
Applicable vehicle: HYUNDAI Sonata 2011-2013
Installation position: Front Right wheel-arch splash protection position
Brand: HYUNDAI
Model: Sonata
Vehicle year: 2011-2013
Protective role: limits tyre-thrown spray and grit around the front wheel opening while helping protect the rocker and lower-fender area
Fitment confirmation: Match the body style where different arches share the same model name for 86832-3S000; The exact wheel location matters because opposite guards are normally not interchangeable.
Physical comparison: Review the embossed features and support surfaces on the reverse side; to support a practical fitment decision before bulk quantities are released.
Supply scope: Supply is for the documented mud flap at the stated wheel position, with consolidated packing available for approved quantities.
Receiving focus: Inspect the arch curve under neutral temperature before trial fitting for HY02017-024; The removed part should remain available for a direct bench comparison.
Purchase preparation: Use both the OE number and YoonShan item code in correspondence; The internal SKU improves traceability across repeat purchasing cycles.
86832-3S000 Front Right Mudguard Product Overview
The component below is organised for body-parts buyers sourcing HYUNDAI Sonata 2011-2013. It limits tyre-thrown spray and grit around the front wheel opening while helping protect the rocker and lower-fender area. Check handedness carefully before removing protective packaging from the supplied part.
Road-Water Management at the Lower Body
Inspect the wheel-side texture, outer face and attachment pattern on 86832-3S000 for the front right wheel-arch splash protection position, because a similar photograph does not prove identical fastening geometry.
Vehicle and OE Fitment Confirmation
Verify the axle and left-right orientation on the vehicle for HYUNDAI Sonata 2011-2013 and the source application "11-13款 索纳塔 挡泥板 前右". The purchase order should state one side, a pair or the required quantity clearly.
Product Technical Specifications
| Product type | Front Right Mudguard |
|---|---|
| Primary OE reference | 86832-3S000 |
| Internal item code | HY02017-024 |
| Vehicle brand | HYUNDAI |
| Model | Sonata |
| Vehicle year | 2011-2013 |
| Installation position | Front Right wheel-arch splash protection position |
| Applicable vehicle | HYUNDAI Sonata 2011-2013 |
| Cross-reference numbers | 86832-3S000 |
Bench Comparison and Final Position Check
Compare the reverse face with the retained original mudguard when 86832-3S000 arrives under item code HY02017-024. Incoming inspection provides a practical checkpoint before labour is scheduled.
Wholesale Ordering Information
Attach the original-part label if the moulded number is difficult to read when requesting 86832-3S000 for HYUNDAI Sonata 2011-2013. The requested supply scope should distinguish the guard from adjacent trim.
Frequently Asked Questions
How can I confirm 86832-3S000 matches my vehicle?
Confirm the OE number, axle, side, production year and mounting layout against the removed part before ordering.
Which physical details should be compared on 86832-3S000?
Set the old and new parts together to check height, width and curvature. so the final edge profile follows the vehicle bodywork cleanly.
What is included with the 86832-3S000 mudguard supply?
This wholesale line contains the illustrated wheel-splash component, without assuming the inclusion of used fasteners from the vehicle.
What should be checked when 86832-3S000 is delivered?
Inspect the arch curve under neutral temperature before trial fitting. Carton and product identities must stay linked during distributor receiving.
What information is needed to quote 86832-3S000?
Attach the original-part label if the moulded number is difficult to read for HY02017-024. Stated delivery expectations help purchasing and production schedules align.
