87620-2D110 Right Exterior Side Mirror Assembly for HYUNDAI Elantra 2004
Primary OE reference: 87620-2D110
Cross-reference 1: 87620-2D110
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Elantra 2004
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2004
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Re-establishes the vehicle’s original rearward observation area without treating a similar housing as universal to reduce incorrect left-right ordering.
Mounting comparison: Photograph the folding joint and base angle using the VIN when year boundaries overlap to separate facelift variations.
Electrical review: Confirm the vehicle-side mirror connector at parts-receiving inspection to identify missing or damaged wiring early.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Receiving priority: Compare the triangular mounting base before paint preparation so cracked glass is found immediately.
Handling note: Handle the mounting studs before the component enters workshop stock to keep the correct SKU traceable.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Submit the destination country with the target delivery timing before electrical variants are quoted.
Internal item code: HY02014-056
87620-2D110 Exterior Side Mirror Assembly Product Overview
87620-2D110 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Elantra 2004. Replaces the side-specific mirror assembly location after collision, housing or glass damage to reduce incorrect left-right ordering. The page records HY02014-056 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Completes the outside viewing surface and housing after the removed part has been identified while maintaining the intended exterior appearance. Supports the factory-style exterior observation point without treating a similar housing as universal so the mirror can be compared against the removed unit. Completes the passenger-side exterior sightline after the removed part has been identified before trim and wiring are reassembled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the triangular mounting base before the order is approved so electrical functions remain compatible. Record the cover contour and lower edge against a retained original sample to separate facelift variations. Review the connector shape and pin count from the inner mounting face to avoid a trim-level mismatch. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Protect the available pin positions at parts-receiving inspection so manual and electrical variants stay separated. Identify the harness exit direction while the original unit is still available so unsupported functions are not claimed. Document the adjustment control type before the inner door panel is refitted so the supplied scope matches the enquiry. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-2D110 |
| Cross-reference numbers | 87620-2D110 |
| Internal item code | HY02014-056 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2004 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Review the purchase-line label before electrical testing begins to protect the visible exterior surface. Review the edge seals and clips against the approved reference so cracked glass is found immediately. Protect the mounting studs before the packaging is discarded to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the required mirror side on repeat distributor orders to support accurate packing. List the preferred shipping method when mixed-model stock is required so lead time can be reviewed correctly. Record the requested quantity before freight options are compared to make repeat ordering more reliable. Confirm the destination country and preferred transport method before export pricing is prepared.
Frequently Asked Questions
What information is needed to quote 87620-2D110?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-2D110?
Supply follows the photographed component; unrelated door trim, switchgear and loose fasteners are separate unless shown. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87620-2D110 listed for?
The recorded application is HYUNDAI Elantra 2004. Production date, trim equipment and connector details still require physical verification.
Can 87620-2D110 fit every Elantra model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87620-2D110 be handled during installation?
Review the mirror adjustment plate without placing weight on the glass before any finishing work starts. Avoid supporting the assembly by the glass or forcing the folding joint.
