87610-H7500 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2021
Primary OE reference: 87610-H7500
Cross-reference 1: 87610-H7500
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2021
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2021
Listed mirror features: integrated signal lamp
Mirror function: Reconstructs the intended viewing angle beside the cabin within the application-specific door geometry without mixing visually similar door mirrors.
Mounting comparison: Identify the glass outline and housing profile before the order is approved so the base seats without distortion.
Electrical review: Verify the mirror-heating circuit with each purchase line kept separate so manual and electrical variants stay separated.
Fitment confirmation: Use 87610-H7500 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Compare the mirror glass before the packaging is discarded to protect the visible exterior surface.
Handling note: Support the triangular mounting base without placing weight on the glass before any finishing work starts.
Wholesale enquiry: Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Order preparation: Attach the internal item code before sample approval to support an accurate B2B quotation.
Internal item code: HY02014-053
87610-H7500 Exterior Side Mirror Assembly Product Overview
87610-H7500 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2021. Supports the mirror base and visible rearward field for the stated production year and model to match the vehicle-specific housing outline. The page records HY02014-053 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Re-establishes the mirror base and visible rearward field inside the vehicle’s original attachment layout before trim and wiring are reassembled. Restores the model-shaped mirror footprint when the original mirror can no longer be reused to support safe rearward observation. Reconstructs the vehicle’s original rearward observation area at the recorded door or auxiliary mounting point before paint or finishing work is scheduled. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the signal-lamp opening against a retained original sample to avoid a trim-level mismatch. Confirm the complete OE label from the inner mounting face so the base seats without distortion. Inspect the manual cable or electrical controls before the order is approved so electrical functions remain compatible. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Compare the harness exit direction during bench comparison to identify missing or damaged wiring early. Identify the lamp lens and terminals before optional functions are promised so manual and electrical variants stay separated. Document the folding mechanism during bench comparison before a powered mirror is operated. The listed feature reference is integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-H7500 |
| Cross-reference numbers | 87610-H7500 |
| Internal item code | HY02014-053 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2021 |
| Installation position | Left exterior mirror position |
| Listed mirror features | integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Check the mirror glass against the approved reference before any finishing work starts. Assess the signal lens on a clean padded surface so left and right mirrors remain separated. Inspect the mounting studs before electrical testing begins to identify transit damage. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Attach the required mirror side before carton planning to support an accurate B2B quotation. Record the sample or bulk-order requirement on repeat distributor orders so the supplied component scope is clear. State the complete OE reference when left and right units are combined so left-right quantities remain correct. State sample, carton-marking and delivery requirements together with the required quantity.
Frequently Asked Questions
Does 87610-H7500 include every electrical function?
The listed feature reference is integrated signal lamp. Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Should 87610-H7500 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-H7500 fitment be confirmed?
Use 87610-H7500 as the purchasing reference, then compare the left exterior mirror position with the removed component. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-H7500 arrives?
Support the mounting studs before paint preparation to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87610-H7500?
List left and right quantities separately when a mixed-side distributor order is requested. Connector and rear-mount photographs help separate close variants.
