87610-1E030 Left Exterior Side Mirror Assembly for HYUNDAI Accent 2006
Primary OE reference: 87610-1E030
Cross-reference 1: 87610-1E030
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2006
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2006
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Returns the roadside awareness point beside the front door with the left or right position clearly separated while maintaining the intended exterior appearance.
Mounting comparison: Record the connector shape and pin count before reusable trim is transferred to prevent an incorrect housing selection.
Electrical review: Inspect the vehicle-side mirror connector before energising a replacement assembly so the supplied scope matches the enquiry.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: Reusable caps, screws and internal door pieces are not automatically included with the listed mirror component.
Receiving priority: Protect the painted or unpainted cover at warehouse receiving to protect the visible exterior surface.
Handling note: Confirm the edge seals and clips during sample approval so connector damage is isolated early.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Separate the sample or bulk-order requirement with the target delivery timing before shipping cost is calculated.
Internal item code: HY02014-037
87610-1E030 Exterior Side Mirror Assembly Product Overview
87610-1E030 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 2006. Recovers the roadside awareness point beside the front door after the removed part has been identified so workshop planning starts with the correct part. The page records HY02014-037 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the exterior mirror mounting envelope inside the vehicle’s original attachment layout without mixing visually similar door mirrors. Re-establishes the vehicle’s original rearward observation area at the recorded door or auxiliary mounting point so the mirror can be compared against the removed unit. Supports the factory-style exterior observation point within the application-specific door geometry while preserving the listed fitment identity. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Confirm the left-right orientation before the order is approved so the plug does not require modification. Review the glass outline and housing profile against the removed mirror to confirm the supplied mirror side. Measure the production-date application with the vehicle year identified before the door trim is disturbed. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Review the turn-signal wiring at parts-receiving inspection so lamp and adjustment requirements are clear. Review the manual control cable with each purchase line kept separate before the workshop schedules installation. Protect the requested functional scope without assuming every trim shares one harness so unsupported functions are not claimed. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-1E030 |
| Cross-reference numbers | 87610-1E030 |
| Internal item code | HY02014-037 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Protect the housing shell before paint preparation to prevent scratches during handling. Compare the mirror glass before the packaging is discarded to identify transit damage. Protect the triangular mounting base without placing weight on the glass so left and right mirrors remain separated. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the adjustment and lamp requirements together with consignee details before a commercial invoice is prepared. Submit the adjustment and lamp requirements together with consignee details to support accurate packing. State the vehicle model and year for every purchase line to make repeat ordering more reliable. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
Is 87610-1E030 a left or right side mirror?
87610-1E030 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-1E030 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Should 87610-1E030 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-1E030 fitment be confirmed?
Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87610-1E030 arrives?
Examine the purchase-line label before paint preparation to protect the visible exterior surface. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
