87620-1E000 Right Exterior Side Mirror Assembly for HYUNDAI Accent 2006
Primary OE reference: 87620-1E000
Cross-reference 1: 87620-1E000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 2006
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 2006
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Maintains the outside viewing surface and housing for an exterior-body repair quotation to match the vehicle-specific housing outline.
Mounting comparison: Cross-check the door-side bolt pattern using the VIN when year boundaries overlap to confirm the supplied mirror side.
Electrical review: Compare the folding mechanism using the application notes and physical sample so manual and electrical variants stay separated.
Fitment confirmation: Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Supplied component scope: Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Receiving priority: Assess the triangular mounting base before the packaging is discarded to prevent scratches during handling.
Handling note: Support the signal lens before the component enters workshop stock so connector damage is isolated early.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Specify the requested quantity together with consignee details to make repeat ordering more reliable.
Internal item code: HY02014-036
87620-1E000 Exterior Side Mirror Assembly Product Overview
87620-1E000 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Accent 2006. Completes the model-shaped mirror footprint with the left or right position clearly separated while keeping the OE purchase reference traceable. The page records HY02014-036 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Renews the door-mounted mirror position for an exterior-body repair quotation to support safe rearward observation. Supports the outside viewing surface and housing for repair stock tied to the listed OE reference to match the vehicle-specific housing outline. Restores the mirror base and visible rearward field when the original mirror can no longer be reused so the correct side remains easy to verify. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the left-right orientation using clear rear and connector photographs to confirm the supplied mirror side. Align the manual cable or electrical controls during incoming-part comparison to separate facelift variations. Match the wiring lead and plug position from the inner mounting face to prevent an incorrect housing selection. Use 87620-1E000 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Electrical and Housing Checks
Confirm the lamp lens and terminals before the inner door panel is refitted so the supplied scope matches the enquiry. Test the plug keying and latch before energising a replacement assembly to prevent a connector mismatch. Trace the lamp lens and terminals with the ignition and battery procedure observed before a powered mirror is operated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-1E000 |
| Cross-reference numbers | 87620-1E000 |
| Internal item code | HY02014-036 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 2006 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Review the carton-supported corners at warehouse receiving so cracked glass is found immediately. Inspect the mirror adjustment plate after unpacking but before installation to protect the visible exterior surface. Protect the folding pivot before the packaging is discarded to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Identify the preferred shipping method when left and right units are combined before electrical variants are quoted. Provide the requested packaging mark for every purchase line so lead time can be reviewed correctly. Reference the requested packaging mark before carton planning to support an accurate B2B quotation. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
Can 87620-1E000 fit every Accent model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87620-1E000 be handled during installation?
Inspect the housing shell before electrical testing begins to protect the visible exterior surface. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87620-1E000 a left or right side mirror?
87620-1E000 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87620-1E000 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Reusable caps, screws and internal door pieces are not automatically included with the listed mirror component.
Should 87620-1E000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
