87610-1C000 Left Exterior Side Mirror Assembly for HYUNDAI Getz 2002
Primary OE reference: 87610-1C000
Cross-reference 1: 87610-1C000
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Getz 2002
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Getz
Vehicle year: 2002
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Restores the intended viewing angle beside the cabin when the original mirror can no longer be reused to reduce incorrect left-right ordering.
Mounting comparison: Measure the production-date application with the existing harness accessible to separate facelift variations.
Electrical review: Verify the turn-signal wiring before the old mirror is disconnected so unsupported functions are not claimed.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Check the edge seals and clips during sample approval to prevent scratches during handling.
Handling note: Assess the painted or unpainted cover before paint preparation to identify transit damage.
Wholesale enquiry: Supply the VIN or production date when the stated model year crosses a design change.
Order preparation: Reference the internal item code with the export quotation request before shipping cost is calculated.
Internal item code: HY02014-017
87610-1C000 Exterior Side Mirror Assembly Product Overview
87610-1C000 identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Getz 2002. Re-establishes the passenger-side exterior sightline for an exterior-body repair quotation so workshop planning starts with the correct part. The page records HY02014-017 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Re-establishes the intended viewing angle beside the cabin for the stated production year and model without mixing visually similar door mirrors. Recovers the mirror base and visible rearward field during a side-mirror replacement project without mixing visually similar door mirrors. Re-establishes the intended viewing angle beside the cabin after the removed part has been identified to reduce incorrect left-right ordering. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Confirm the cover contour and lower edge with the vehicle year identified before paint and assembly labour are committed. Compare the complete OE label during incoming-part comparison to avoid a trim-level mismatch. Inspect the left-right orientation before reusable trim is transferred to prevent an incorrect housing selection. Compare mounting studs, housing profile and plug shape before approving HY02014-017 for installation.
Electrical and Housing Checks
Verify the adjustment control type before energising a replacement assembly to keep function expectations documented. Inspect the lamp lens and terminals before energising a replacement assembly to identify missing or damaged wiring early. Confirm the folding mechanism at parts-receiving inspection before a powered mirror is operated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-1C000 |
| Cross-reference numbers | 87610-1C000 |
| Internal item code | HY02014-017 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Getz |
| Model year | 2002 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the folding pivot without placing weight on the glass so cracked glass is found immediately. Protect the mounting studs on a clean padded surface to prevent scratches during handling. Review the mirror glass with transit packaging retained so left and right mirrors remain separated. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the destination country before carton planning to make repeat ordering more reliable. Reference the preferred shipping method together with consignee details so similar mirror housings remain separated. Confirm the requested quantity on repeat distributor orders so left-right quantities remain correct. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
Can 87610-1C000 fit every Getz model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87610-1C000 be handled during installation?
Isolate the signal lens before the component enters workshop stock to prevent scratches during handling. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87610-1C000 a left or right side mirror?
87610-1C000 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-1C000 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Should 87610-1C000 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
