87620-4N010CA Left Exterior Side Mirror Assembly for HYUNDAI EON
Primary OE reference: 87620-4N010CA
Cross-reference 1: 87620-4N010CA
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI EON
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: EON
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Maintains the model-shaped mirror footprint when the original mirror can no longer be reused while maintaining the intended exterior appearance.
Mounting comparison: Cross-check the triangular mounting base against the removed mirror so electrical functions remain compatible.
Electrical review: Verify the requested functional scope with each purchase line kept separate before final fitment approval.
Fitment confirmation: Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Compare the edge seals and clips without placing weight on the glass to prevent scratches during handling.
Handling note: Check the painted or unpainted cover at warehouse receiving to keep the correct SKU traceable.
Wholesale enquiry: Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Order preparation: Submit the requested packaging mark before freight options are compared so lead time can be reviewed correctly.
Internal item code: HY02014-013
87620-4N010CA Exterior Side Mirror Assembly Product Overview
87620-4N010CA identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI EON. Supports the intended viewing angle beside the cabin within the application-specific door geometry before trim and wiring are reassembled. The page records HY02014-013 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Replaces the vehicle’s original rearward observation area at the recorded door or auxiliary mounting point before trim and wiring are reassembled. Restores the roadside awareness point beside the front door with the left or right position clearly separated so the mirror can be compared against the removed unit. Renews the mirror base and visible rearward field inside the vehicle’s original attachment layout without mixing visually similar door mirrors. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Cross-check the complete OE label with the vehicle year identified so the original fasteners align correctly. Cross-check the cover contour and lower edge before the order is approved so electrical functions remain compatible. Compare the production-date application with the existing harness accessible so the plug does not require modification. Compare mounting studs, housing profile and plug shape before approving HY02014-013 for installation.
Electrical and Housing Checks
Document the requested functional scope at parts-receiving inspection to prevent a connector mismatch. Compare the vehicle-side mirror connector while the original unit is still available before final fitment approval. Trace the manual control cable before the inner door panel is refitted so lamp and adjustment requirements are clear. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-4N010CA |
| Cross-reference numbers | 87620-4N010CA |
| Internal item code | HY02014-013 |
| Vehicle brand | HYUNDAI |
| Vehicle model | EON |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Support the mounting studs before paint preparation so cracked glass is found immediately. Isolate the mirror adjustment plate under neutral receiving light before any finishing work starts. Document the mirror glass after unpacking but before installation to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Record the connector-side photograph on the wholesale enquiry to support accurate packing. Confirm the requested packaging mark when mixed-model stock is required so the supplied component scope is clear. Attach the requested quantity before freight options are compared so similar mirror housings remain separated. Include HY02014-013 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
Is 87620-4N010CA a left or right side mirror?
87620-4N010CA is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87620-4N010CA include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Should 87620-4N010CA be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87620-4N010CA fitment be confirmed?
Confirm HYUNDAI EON and the left side before checking the base outline and connector. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87620-4N010CA arrives?
Document the triangular mounting base before the component enters workshop stock to prevent scratches during handling. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
