87610-4N140CA Right Exterior Side Mirror Assembly for HYUNDAI EON
Primary OE reference: 87610-4N140CA
Cross-reference 1: 87610-4N140CA
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI EON
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: EON
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Restores the exterior mirror mounting envelope for repair stock tied to the listed OE reference without mixing visually similar door mirrors.
Mounting comparison: Inspect the wiring lead and plug position before the order is approved to confirm the supplied mirror side.
Electrical review: Confirm the manual control cable with the ignition and battery procedure observed before a powered mirror is operated.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Receiving priority: Confirm the signal lens before the component enters workshop stock to prevent scratches during handling.
Handling note: Compare the signal lens without placing weight on the glass so every received unit can be accounted for.
Wholesale enquiry: Include HY02014-012 on repeat orders so the requested application remains traceable.
Order preparation: List the requested quantity when left and right units are combined so left-right quantities remain correct.
Internal item code: HY02014-012
87610-4N140CA Exterior Side Mirror Assembly Product Overview
87610-4N140CA identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI EON. Preserves the driver-side rearward viewing point without treating a similar housing as universal before trim and wiring are reassembled. The page records HY02014-012 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Re-establishes the door-mounted mirror position within the application-specific door geometry to match the vehicle-specific housing outline. Re-establishes the outside viewing surface and housing when the original mirror can no longer be reused to match the vehicle-specific housing outline. Re-establishes the driver-side rearward viewing point when the original mirror can no longer be reused to match the vehicle-specific housing outline. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Align the door-side bolt pattern against the removed mirror to prevent an incorrect housing selection. Confirm the manual cable or electrical controls against a retained original sample so the plug does not require modification. Compare the manual cable or electrical controls against the removed mirror before the door trim is disturbed. Confirm HYUNDAI EON and the right side before checking the base outline and connector.
Electrical and Housing Checks
Confirm the harness exit direction before the inner door panel is refitted to avoid damaging vehicle-side terminals. Separate the manual control cable before the old mirror is disconnected so the supplied scope matches the enquiry. Identify the turn-signal wiring using the application notes and physical sample so manual and electrical variants stay separated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87610-4N140CA |
| Cross-reference numbers | 87610-4N140CA |
| Internal item code | HY02014-012 |
| Vehicle brand | HYUNDAI |
| Vehicle model | EON |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the edge seals and clips under neutral receiving light before the repair schedule is affected. Compare the edge seals and clips under neutral receiving light so left and right mirrors remain separated. Document the carton-supported corners before electrical testing begins to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Separate the sample or bulk-order requirement together with consignee details so similar mirror housings remain separated. Separate the requested quantity before carton planning to support an accurate B2B quotation. Include the required mirror side on the wholesale enquiry so left-right quantities remain correct. Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Frequently Asked Questions
How should 87610-4N140CA be handled during installation?
Confirm the triangular mounting base during sample approval so every received unit can be accounted for. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87610-4N140CA a left or right side mirror?
87610-4N140CA is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87610-4N140CA include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Should 87610-4N140CA be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87610-4N140CA fitment be confirmed?
Use 87610-4N140CA as the purchasing reference, then compare the right exterior mirror position with the removed component. The complete OE reference and right exterior mirror position should agree before installation.
