87910-0R040 Right Exterior Side Mirror Assembly for TOYOTA RAV4 2012
Primary OE reference: 87910-0R040
Cross-reference 1: 87910-0R040
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA RAV4 2012
Installation position: Right exterior mirror position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2012
Listed mirror features: 9-wire application reference
Mirror function: Replaces the door-mounted mirror position after collision, housing or glass damage so the mirror can be compared against the removed unit.
Mounting comparison: Photograph the connector shape and pin count before body-color work begins so the original fasteners align correctly.
Electrical review: Test the folding mechanism before the old mirror is disconnected so unsupported functions are not claimed.
Fitment confirmation: Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Check the mirror adjustment plate before the packaging is discarded to protect the visible exterior surface.
Handling note: Support the triangular mounting base after unpacking but before installation so every received unit can be accounted for.
Wholesale enquiry: Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors.
Order preparation: List the preferred shipping method on repeat distributor orders before a commercial invoice is prepared.
Internal item code: TY02014-010
87910-0R040 Exterior Side Mirror Assembly Product Overview
87910-0R040 identifies an exterior side mirror assembly for the right exterior mirror position on TOYOTA RAV4 2012. Provides the intended viewing angle beside the cabin with the left or right position clearly separated without mixing visually similar door mirrors. The page records TY02014-010 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Restores the side-specific mirror assembly location without treating a similar housing as universal without mixing visually similar door mirrors. Supports the side-specific mirror assembly location at the recorded door or auxiliary mounting point before trim and wiring are reassembled. Maintains the outside viewing surface and housing after the removed part has been identified while preserving the listed fitment identity. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Verify the complete OE label from the inner mounting face before the door trim is disturbed. Verify the manual cable or electrical controls before body-color work begins to separate facelift variations. Inspect the cover contour and lower edge with the existing harness accessible to confirm the supplied mirror side. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Test the turn-signal wiring without assuming every trim shares one harness so the supplied scope matches the enquiry. Verify the harness exit direction with the ignition and battery procedure observed so unsupported functions are not claimed. Trace the vehicle-side mirror connector at parts-receiving inspection to prevent a connector mismatch. The listed feature reference is 9-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87910-0R040 |
| Cross-reference numbers | 87910-0R040 |
| Internal item code | TY02014-010 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2012 |
| Installation position | Right exterior mirror position |
| Listed mirror features | 9-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Review the folding pivot after unpacking but before installation to identify transit damage. Isolate the signal lens on a clean padded surface to protect the visible exterior surface. Document the mirror adjustment plate under neutral receiving light before the part is accepted into inventory. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Provide the requested packaging mark on repeat distributor orders to make repeat ordering more reliable. Include the vehicle model and year on the wholesale enquiry so similar mirror housings remain separated. Record the destination country before sample approval to support an accurate B2B quotation. Include TY02014-010 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
How should 87910-0R040 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 87910-0R040 arrives?
Protect the painted or unpainted cover on a clean padded surface so every received unit can be accounted for. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87910-0R040?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 87910-0R040?
Supply follows the photographed component; unrelated door trim, switchgear and loose fasteners are separate unless shown. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87910-0R040 listed for?
The recorded application is TOYOTA RAV4 2012. Production date, trim equipment and connector details still require physical verification.
