87910-12F80 Right Exterior Side Mirror Assembly for TOYOTA Corolla 2020
Primary OE reference: 87910-12F80
Cross-reference 1: 87910-12F80
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA Corolla 2020
Installation position: Right exterior mirror position
Brand: TOYOTA
Model: Corolla
Vehicle year: 2020
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Preserves the driver-side rearward viewing point at the recorded door or auxiliary mounting point before trim and wiring are reassembled.
Mounting comparison: Match the left-right orientation before the order is approved to separate facelift variations.
Electrical review: Compare the folding mechanism while the original unit is still available before a powered mirror is operated.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Handle the purchase-line label against the approved reference to keep the correct SKU traceable.
Handling note: Document the folding pivot against the approved reference so every received unit can be accounted for.
Wholesale enquiry: Include TY02014-004 on repeat orders so the requested application remains traceable.
Order preparation: List the sample or bulk-order requirement when left and right units are combined to support accurate packing.
Internal item code: TY02014-004
87910-12F80 Exterior Side Mirror Assembly Product Overview
87910-12F80 identifies an exterior side mirror assembly for the right exterior mirror position on TOYOTA Corolla 2020. Restores the intended viewing angle beside the cabin after the removed part has been identified to reduce incorrect left-right ordering. The page records TY02014-004 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Preserves the roadside awareness point beside the front door with the left or right position clearly separated to match the vehicle-specific housing outline. Reconstructs the factory-style exterior observation point after the removed part has been identified while maintaining the intended exterior appearance. Reconstructs the vehicle’s original rearward observation area for repair stock tied to the listed OE reference before trim and wiring are reassembled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Confirm the left-right orientation before body-color work begins so the plug does not require modification. Verify the signal-lamp opening using the VIN when year boundaries overlap so the plug does not require modification. Match the glass outline and housing profile before the order is approved to separate facelift variations. A connector-side photograph and the retained mirror provide the strongest comparison for this application.
Electrical and Housing Checks
Protect the manual control cable with each purchase line kept separate so the supplied scope matches the enquiry. Confirm the plug keying and latch with each purchase line kept separate before reusable parts are transferred. Trace the harness exit direction before optional functions are promised to identify missing or damaged wiring early. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87910-12F80 |
| Cross-reference numbers | 87910-12F80 |
| Internal item code | TY02014-004 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2020 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the housing shell with transit packaging retained to protect the visible exterior surface. Isolate the connector terminals after unpacking but before installation to keep the correct SKU traceable. Protect the mirror adjustment plate without placing weight on the glass so every received unit can be accounted for. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
State the requested quantity when left and right units are combined before a commercial invoice is prepared. Submit the vehicle model and year when mixed-model stock is required to support an accurate B2B quotation. Reference the required mirror side on the wholesale enquiry to reduce warehouse picking errors. List left and right quantities separately when a mixed-side distributor order is requested.
Frequently Asked Questions
What is supplied with 87910-12F80?
Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87910-12F80 listed for?
The recorded application is TOYOTA Corolla 2020. Production date, trim equipment and connector details still require physical verification.
Can 87910-12F80 fit every Corolla model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87910-12F80 be handled during installation?
Document the purchase-line label before electrical testing begins to protect the visible exterior surface. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87910-12F80 a left or right side mirror?
87910-12F80 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
