87910-12K70 Right Exterior Side Mirror Assembly for TOYOTA Corolla 2020
Primary OE reference: 87910-12K70
Cross-reference 1: 87910-12K70
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA Corolla 2020
Installation position: Right exterior mirror position
Brand: TOYOTA
Model: Corolla
Vehicle year: 2020
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Replaces the passenger-side exterior sightline at the recorded door or auxiliary mounting point so workshop planning starts with the correct part.
Mounting comparison: Inspect the production-date application during incoming-part comparison to avoid a trim-level mismatch.
Electrical review: Compare the available pin positions using the application notes and physical sample before a powered mirror is operated.
Fitment confirmation: Compare mounting studs, housing profile and plug shape before approving TY02014-002 for installation.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Review the edge seals and clips during sample approval so cracked glass is found immediately.
Handling note: Assess the mounting studs against the approved reference so every received unit can be accounted for.
Wholesale enquiry: Confirm the destination country and preferred transport method before export pricing is prepared.
Order preparation: Identify the vehicle model and year with the export quotation request to make repeat ordering more reliable.
Internal item code: TY02014-002
87910-12K70 Exterior Side Mirror Assembly Product Overview
87910-12K70 identifies an exterior side mirror assembly for the right exterior mirror position on TOYOTA Corolla 2020. Recovers the intended viewing angle beside the cabin without treating a similar housing as universal to reduce incorrect left-right ordering. The page records TY02014-002 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Renews the vehicle’s original rearward observation area when the original mirror can no longer be reused so the mirror can be compared against the removed unit. Recovers the vehicle’s original rearward observation area when the original mirror can no longer be reused so workshop planning starts with the correct part. Restores the passenger-side exterior sightline when the original mirror can no longer be reused while preserving the listed fitment identity. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Verify the signal-lamp opening against a retained original sample to avoid a trim-level mismatch. Verify the left-right orientation during incoming-part comparison to avoid a trim-level mismatch. Identify the signal-lamp opening during incoming-part comparison to distinguish manual and powered applications. Compare mounting studs, housing profile and plug shape before approving TY02014-002 for installation.
Electrical and Housing Checks
Review the harness exit direction with the ignition and battery procedure observed so lamp and adjustment requirements are clear. Identify the lamp lens and terminals during bench comparison to identify missing or damaged wiring early. Inspect the adjustment control type using the application notes and physical sample so manual and electrical variants stay separated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87910-12K70 |
| Cross-reference numbers | 87910-12K70 |
| Internal item code | TY02014-002 |
| Vehicle brand | TOYOTA |
| Vehicle model | Corolla |
| Model year | 2020 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the triangular mounting base during sample approval so connector damage is isolated early. Document the mirror adjustment plate before the component enters workshop stock so connector damage is isolated early. Review the purchase-line label at warehouse receiving so left and right mirrors remain separated. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Provide the required mirror side before carton planning to reduce warehouse picking errors. Attach the internal item code when left and right units are combined so lead time can be reviewed correctly. Submit the vehicle model and year when left and right units are combined so the supplied component scope is clear. Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Frequently Asked Questions
Can 87910-12K70 fit every Corolla model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 87910-12K70 be handled during installation?
Examine the connector terminals before paint preparation to protect the visible exterior surface. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 87910-12K70 a left or right side mirror?
87910-12K70 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87910-12K70 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Should 87910-12K70 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
