76258-TLY-H01 Left Exterior Side Mirror Assembly for HONDA CR-V 2017
Primary OE reference: 76258-TLY-H01
Cross-reference 1: 76258-TLY-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA CR-V 2017
Installation position: Left exterior mirror position
Brand: HONDA
Model: CR-V
Vehicle year: 2017
Listed mirror features: 5-wire application reference
Mirror function: Restores the side-specific mirror assembly location without treating a similar housing as universal before paint or finishing work is scheduled.
Mounting comparison: Cross-check the door-side bolt pattern before the order is approved to prevent an incorrect housing selection.
Electrical review: Protect the lamp lens and terminals with the ignition and battery procedure observed to prevent a connector mismatch.
Fitment confirmation: Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Compare the signal lens before paint preparation to protect the visible exterior surface.
Handling note: Handle the triangular mounting base under neutral receiving light so cracked glass is found immediately.
Wholesale enquiry: Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors.
Order preparation: Include the requested packaging mark for every purchase line so lead time can be reviewed correctly.
Internal item code: HD02014-031
76258-TLY-H01 Exterior Side Mirror Assembly Product Overview
76258-TLY-H01 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA CR-V 2017. Replaces the door-mounted mirror position inside the vehicle’s original attachment layout to reduce incorrect left-right ordering. The page records HD02014-031 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the factory-style exterior observation point when the original mirror can no longer be reused before paint or finishing work is scheduled. Reconstructs the mirror base and visible rearward field for repair stock tied to the listed OE reference while keeping the OE purchase reference traceable. Supports the door-mounted mirror position for the stated production year and model so the mirror can be compared against the removed unit. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Cross-check the manual cable or electrical controls from the inner mounting face so the original fasteners align correctly. Verify the complete OE label from the inner mounting face so the original fasteners align correctly. Compare the left-right orientation during incoming-part comparison to confirm the supplied mirror side. Compare mounting studs, housing profile and plug shape before approving HD02014-031 for installation.
Electrical and Housing Checks
Verify the lamp lens and terminals after transit restraints are removed to identify missing or damaged wiring early. Compare the turn-signal wiring before the old mirror is disconnected to identify missing or damaged wiring early. Document the turn-signal wiring with the ignition and battery procedure observed so manual and electrical variants stay separated. The listed feature reference is 5-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76258-TLY-H01 |
| Cross-reference numbers | 76258-TLY-H01 |
| Internal item code | HD02014-031 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017 |
| Installation position | Left exterior mirror position |
| Listed mirror features | 5-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Assess the mirror adjustment plate before paint preparation to protect the visible exterior surface. Assess the purchase-line label under neutral receiving light to prevent scratches during handling. Handle the purchase-line label at warehouse receiving so connector damage is isolated early. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Attach the connector-side photograph before sample approval so similar mirror housings remain separated. Separate the preferred shipping method for every purchase line to keep the OE identity traceable. Specify the destination country before freight options are compared to support accurate packing. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
Does 76258-TLY-H01 include every electrical function?
The listed feature reference is 5-wire application reference. The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Should 76258-TLY-H01 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 76258-TLY-H01 fitment be confirmed?
Verify production year, trim equipment and left-right orientation because similar housings can use different wiring. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 76258-TLY-H01 arrives?
Protect the folding pivot before the packaging is discarded so connector damage is isolated early. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76258-TLY-H01?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
