76258-T0T-H11 Left Exterior Side Mirror Assembly for HONDA CR-V 2012
Primary OE reference: 76258-T0T-H11
Cross-reference 1: 76258-T0T-H11
Cross-reference 2: 76258-T0T-H12
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA CR-V 2012
Installation position: Left exterior mirror position
Brand: HONDA
Model: CR-V
Vehicle year: 2012
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Recovers the vehicle’s original rearward observation area without treating a similar housing as universal to match the vehicle-specific housing outline.
Mounting comparison: Cross-check the manual cable or electrical controls using the VIN when year boundaries overlap to avoid a trim-level mismatch.
Electrical review: Protect the mirror-heating circuit while the original unit is still available to avoid damaging vehicle-side terminals.
Fitment confirmation: Compare mounting studs, housing profile and plug shape before approving HD02014-029 for installation.
Supplied component scope: Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Receiving priority: Support the edge seals and clips before paint preparation so connector damage is isolated early.
Handling note: Handle the connector terminals before the packaging is discarded to identify transit damage.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Include the requested quantity on the wholesale enquiry so left-right quantities remain correct.
Internal item code: HD02014-029
76258-T0T-H11 Exterior Side Mirror Assembly Product Overview
76258-T0T-H11 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA CR-V 2012. Returns the outside viewing surface and housing for an exterior-body repair quotation to reduce incorrect left-right ordering. The page records HD02014-029 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Provides the door-mounted mirror position at the recorded door or auxiliary mounting point while preserving the listed fitment identity. Restores the exterior mirror mounting envelope at the recorded door or auxiliary mounting point so the mirror can be compared against the removed unit. Preserves the intended viewing angle beside the cabin for the stated production year and model so workshop planning starts with the correct part. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Identify the manual cable or electrical controls from the inner mounting face so the plug does not require modification. Review the connector shape and pin count before reusable trim is transferred so the plug does not require modification. Record the cover contour and lower edge using the VIN when year boundaries overlap before the part enters installation work. Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Electrical and Housing Checks
Inspect the turn-signal wiring at parts-receiving inspection so unsupported functions are not claimed. Identify the mirror-heating circuit while the original unit is still available so manual and electrical variants stay separated. Test the plug keying and latch before optional functions are promised so unsupported functions are not claimed. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76258-T0T-H11 |
| Cross-reference numbers | 76258-T0T-H11 76258-T0T-H12 |
| Internal item code | HD02014-029 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2012 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the mirror adjustment plate against the approved reference to prevent scratches during handling. Handle the triangular mounting base before paint preparation to protect the visible exterior surface. Handle the folding pivot against the approved reference before the repair schedule is affected. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Submit the required mirror side before production scheduling to support accurate packing. Separate the required mirror side before carton planning to keep the OE identity traceable. Specify the destination country before carton planning to reduce warehouse picking errors. Include HD02014-029 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
What should be checked when 76258-T0T-H11 arrives?
Confirm the mirror glass during sample approval so connector damage is isolated early. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76258-T0T-H11?
State sample, carton-marking and delivery requirements together with the required quantity. Connector and rear-mount photographs help separate close variants.
What is supplied with 76258-T0T-H11?
Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76258-T0T-H11 listed for?
The recorded application is HONDA CR-V 2012. Production date, trim equipment and connector details still require physical verification.
Can 76258-T0T-H11 fit every CR-V model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
